The ***ALL NEW*** AUSubaru.com.au Forums

Coxy - thank you very much!!

Hi all, I know I'm unlikely to have any success, but does anybody know more about the factory EA81 twin carbies, specifically a plumbing diagram or equivalent information? Just got a few weird bits and pieces, appears no fuel return line on these, also the existing '89 emissions plumbing is very dif...

This is a thread bump

This is a thread bump

This is a thread bump

This is a thread bump

Plenty of twin carby engines lying around in Australia (although not safari setup) if you know where to look. Unfortunately a large percentage of them have been stuck interstate in various stages of promised and paid for rebuild for the last two years along with all my various sets of twin carbs tha...

A friend of mine is currently rebuilding one of the twin carby/twin port head engines for me. Unfortunately there have been unforeseen circumstances but I will be posting here once all is good to go. As the engine is in Brisbane and I now reside in Sydney I am unable to get more involved.

This is a thread bump

This is a thread bump

This is a thread bump

Mine is the same. When I got it only the RH indicators would blink, mechanic said he had to play around with the contacts in the ignition barrel to get it to work. Now it takes a few blinks of the right indicators for the left ones to come on, but as it's ultimately working I haven't touched it furt...

Also recommend Boxer Service highly, they also did a careful job overhauling a well used MY power assisted steering steering rack and pump for me ages ago and it hasn't skipped a beat.

This is a thread bump

It's happened again pretty quickly to the Brumby's co-driver, so she is off the road until I can get back from elsewhere to look further into the problem. I will keep you all updated.

Had something happen to me yesterday in the Brumby that I've never heard of before, 4sp DR trans. I'd just started the car and selected reverse with the steering turned close to lock (as I'd been parked in from both ends and I'd not had enough room to get out onto the road on first attempt) and the ...

This is a thread bump

Thank you all, that's amazing help!! Especially the pics!

Hi all, Firstly apologies for being absent on here for quite a while. I've just relocated state, changed job and 100 other things which are only just beginning to settle down. I have an EA81 twin port engine in the final stages of rebuild, and my attention is now turned towards the fact that I have ...

This is a thread bump