The ***ALL NEW*** AUSubaru.com.au Forums

looks like everyone concurs - Monroe front struts rubbish - and they were!! Gabriels, oh there so damn soft, probably last fine if just on-road. KYB - ah just magic. I really don't know why it took me 2 goes to get to the right ones - but KYB not normally stocked by the locals. However, I had replac...

This is a thread bump

This is a thread bump

needs to be pass worded and name linked with the forum. But its mediawiki and has weaknesses in this area. Rather disappointing because I did some pages in there too, all crapped up now. If it is to be revived, it might be best to see if there is a backup say 2 or 3 or even 4 years old - before spam...

the tensioner is very very expensive to replace though.for what it is I reckon if you can release the tensioner and then re-tension it, and the seal on it looks good, its as good as a new one. It should be obvious if it is a failed part, so needlessly replacing it?:rolleyes: Cam Seals are a good thi...

had this exact problem some weeks back in OBW. Found some plug under the dash worked loose, one of those long rectangular ones that are difficult to get to. I had fiddled with them earlier in the year, and didn't quite fit their support back properly hence worked loose. For a while it was intermitte...

Are those Phillips Xenon bulbs more bluish than white ?

Also I would question whether 130/100W are legal also ?

This is a thread bump

This is a thread bump

Yes as mine is but it had me thinking. The multi meter has them both as positive, how is that working. it has me perplexed. :D The coil is negative switched, ie to ground. So your probing with the multimeter and seeing +12 volts on both terminals, well thats good, it hasn't gone open circuit. The p...

have fixed much worse than that at home, but you need a welder, best is a MIG welder that can do gasless and gas. Use disposable gas bottles - cheaper. And its a very good excuse to buy a welder and learn to use it. The cost of it is quickly recouped on your first repair, your own labour is free, pa...

the plan is to make them light weight ali welded instead of solid blocks, much cheaper to manufacture wonder what your thinking here ? does NOT sound good to me "machining blocks", ? there shouldn't be any need to machine any blocks, cut,welding and drilling should be all. The steering extension mi...

This is a thread bump

This is a thread bump

just paid $154 for 5year license - NSW,
so looks like thats not too bad comparing other states, ?? crikey ! didn't expect that

spotted this http://forums.overlander.com.au/viewforum.php?f=40 part of the guidelines.... Cape York Miser Challenge 2011 Participant Guidelines. As I have stated before, this is not an “event” so rules are not what these are. I think we have seen enough response in this thread to be satisfied that ...

This is a thread bump

one front shaft, never used, so new. I'm told its not the best of brands though, so selling for $50 should still get value out of that.(less than 1/2 new price) another front shaft, its been well used, and still good. The boots are good, ifirc, the boots have no wear as i replaced them so ready to g...

I noticed ebay now has a icon "report item", so I did, suggest everyone else do the same.... we'll see if ebay does anything;) in the meantime, the best we can do is raise discussion of such things, so those people as are just short of ignorant and have a clue to at least google about the product be...

This is a thread bump