The ***ALL NEW*** AUSubaru.com.au Forums

in a similar ship.

was a contractor for the local council up here, contracts ended and didnt win it back (massive price undercut). after 15years i find myself looking for a trade or job to get into

on the plus side, the few weeks i've had off has seen alot of work done to the brumby

what i did with my sports cluster is sit down with pencil and paper back trace each number, (most of the wires are in the factory brumby loom, same colours and all, mostly needed to add illumination as its required a few times in the sports cluster) * pin 1, illumination red/green * pin 2, illuminat...

cheers, passed the info on to my uncle (has an FF1 in Bris)

Yep

sounds like there is a few of us facing this issue. sounds like you have the later model wiring loom and need the early model wiring loom.. i have the earlier model wiring loom and need the later model wiring loom.. how do you feel of mass producing these new improved wiring looms? hehe i know i wil...

my guess is from the WRX master cylinder to the MY distribution block underneath

any update on your prgress Proton?

is there any cooling differences between auto and manual radiators?

would it advisable to use the "auto cooler" in the auto radiator for a WTAIC set-up??


thanks Pecked

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/11062132_10152987036487104_1341772693151208659_n.jpg?oh=d5b170d28c3c029ba3059da0008bb652&oe=5655BE87&__gda__=1444389112_c4b4afa38c363b0fd268ca96936fc8fd my mancave. been along time in the burner. makes tinkering so so so much more enjo...

I'm thinking of changing the routing so the cables run under the car (in the driveshaft channel) so (a) they can't be seen under the carpet (vinyl), and (b) it means the handbrake cable is pulled up and back rather than around and up. The only problem I can see is possible interference with the dri...

glad to see it went to a good home.

How are the new headlights going for you ? did you get HIDs ? Are the inners "spoties" ? If not HIDs did you alter the wiring to run all bulbs together on "high " ? cheers i went back to the stockies for the moment as the light output from the aftermarket headlights where crap (could of been the st...

Going from 16x7 to 16x8 is going to mean 215 or wider tyres, which will mean your rolling diameter is going to be taller than stock (throwing your speedo out). Unless you're planning on rubber band wheels - I worked out 8" rims would mean 40 profile tyres, and 215/40/16 aren't common (there are opt...

I see you have the same offset as I have on your 5-stud's. 16x7" it looks like ? Mine are 15x6" and handling is down from the old 14" pugs which had about a +30 offset instead of the standard Subaru +47 offset. I'm seriously considering 25mm spacers just to get the wheels back to where they should ...

so found out the rear calipers where rubbing on the calipers. ended up machining a 3mm spacer to sit behind the ********* spindle. fixed the issue beautifully new CV shafts went in, been driving the last few days.. seems i am getting bubbles in my overflow coolant bottle? a bit more playing around.....

installed the handbrake (04 XT), put in the bigger brake master.. bled the system then went to take it for a drive.. well turns out i didnt build the CV properly, it shattered so took them into a CV shop this morn to let the professionals handle it. put some in some spare stubs into the hubs and too...

i got the 4post over the 2post for a few reasons. the car needs to be perfectly balanced on a 2post otherwise death happens. 4post works any old way (within reason) the 4post lifts the car high enough that you can easly walk around/under/through without any issues at all. (plus i have the pneumatic ...

bit of an update playing with the Brumby again installed the 5stud kit, the 4/2 pots and replaced the boots that needed to be replaced (working on CV joints is a nightmare) https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xat1/v/t1.0-9/11402840_10152994820332104_5910564453250637598_n.jpg?oh=2317abc...

El_Freddo wrote:Hehehe... I forgot we had Bendigo members on here.

my Uncle is in Bendigo. has a few Brumby's, Coupes and an MY Wagon last time i saw

was told you need the anolouge dash fuel sender