The ***ALL NEW*** AUSubaru.com.au Forums

settle for cash without involving the insurance. work out the replacement cost, including your improvements and see if she will pay for it. then you get the wreck and cash to replace the wreck. glad no one was hurt. and it will slow the young feller down for a bit. perhaps a advanced driving course ...

riggers gloves for me, ok once you are used to them, and long sleeves too, so you dont have to scrub your arms

the drain maybe there to drain the water from the window seal area, if you block it the water may build up and rust the Apillar.
maybe where the water runs the underside of the panel, you could put a line of silicone to make the water drop instead of run

from what i read they are not an interferance engine, so the valves cant hit the pistons unlike the twin cammers.
need more info on the noise, front, rear, one side, both sides, maybe a spanner in the fan?

make a note in log book that speedo was changed, old kms and new kms

too tight to turn, (brakes, rubbing on something), or too tight to steer

pity it doesnt have the horny blitzen body kit on it

normally remove covers around column, and the anti theft screws to turn them use a centre punch and chase them around.
if you not going far maybe lower column off the mounts, unplug wiring and spin whole column round and round.

i like them speed bleeders, they look cool. one way valve built in, very naf.
nice work too ap, i wondered what to do with the sprayer set up now the kids have broke the spray end off when they wacking the dog

maybe lucky and get them out undercar. i normall use wide vice on bench with a selection of sockets. that said, the sisters sigma ones got punched into orbit through the tin roof with a 100t press, they were pretty tight! park car on car ramps at rear and you can pull tailshaft without dropping oil,...

OU78AK OUT84K OUT84C i vary nearly bought LIQUIDHOT, for the old magna as in Liquid hot magma, ala austin powers. wa is spoilt with its cheap plates and no ongoing fees, although rumor is that it will change. i got personal plates on 2 vehicles and dont like the initials/birthday thing or the HOTGTS...

thats them, speedisleeves. i do forget that we need to treat customers cars differently to our own, in that if it breaks again we can just fix it again. i only get busted ass heaps to fix and even a bodgie repair will outlast the car. owned by people that can barely afford the petrol to get the car ...

just to bump me ttt.
brumby still under wraps, wrx has the new clutch finished and i can conclude that i wont get a button clutch or advise anyone to get one.
changed jobs again, now on 3x1 at cape preston, south of karratha

toongas avatar seems to have missed his mouth

when factories started building cars with better rollover protection or stronger cabins, they built fatter a pillars, as windscreens laid back further, and got longer they need fatter a pillars to support them. all goes to saying that a pillars are far worse than they were a few years ago, you just ...

if thats a reason to throw out a gearbox, better throw it my way. bearing places used to sell these sleeves made of stainless steel, you machine the shaft down one size and tap the sleeve on, good as new! either that or maybe there is a bearing with smaller hole available imperial/metric. you could ...

its not stalking unless i know where you live.

its not a bad habit till you do it at work.

its all fun and games till some one loses a hymen.

toongs, that roo bar is still here if you wanna drop in

there is a mob next to cannington train station on welshpool rd side next door to the lunch bar. Leo Gommers 2/2 Gibb St Cannington 9451 5238 another is called alliance rim repairs in malaga. http://www.alliancerimrepairs.com.au/ both places heliarc or tig weld the gouges, machine back to the origin...

we got up meharry with a hilux, its a bit of a goat track but you will go alright. well worth the trip