New 15" rims on the brumby
New 15" rims on the brumby
Finally got the 4/100 stud pattern fitted and running beautiful. Comments welcome.
http://www.impactflooring.com.au/soobie ... e-side.jpg
http://www.impactflooring.com.au/soobie ... e-side.jpg
New plates on the way.


- Chris_Rogers
- General Member
- Posts: 1155
- Joined: Sat Dec 31, 2005 10:00 am
- Location: Brisbane
- Contact:
they are CSA edge rims. 15*6.5" with 4/100 stud pattern and 38 positive offset. As per a pulsar or a lancer. i don't remember which. I had the spiggot supports taken down to 54mm on the front and there isn't a spiggot support on the rear. It isn't possible to keep any spiggot support on the rear hub. I can have the conversion done for others for $350 and postage if any other person wants a better choice of rim. ADR compliance is my next move. So best for others to wait if they want a lawful setup.
New plates on the way.


- Chris_Rogers
- General Member
- Posts: 1155
- Joined: Sat Dec 31, 2005 10:00 am
- Location: Brisbane
- Contact:
- Chris_Rogers
- General Member
- Posts: 1155
- Joined: Sat Dec 31, 2005 10:00 am
- Location: Brisbane
- Contact:
http://ausubaru.com/main/modules.php?na ... opic&t=747
This post explains all that has happened to this brumby. side indicators are off wrx (98 to 00) i think. bought off e-bay.
This post explains all that has happened to this brumby. side indicators are off wrx (98 to 00) i think. bought off e-bay.
New plates on the way.

