The AUSubaru.com.au Forums

Finally got the 4/100 stud pattern fitted and running beautiful. Comments welcome.
http://www.impactflooring.com.au/soobie ... e-side.jpg

Yep, looks great.

What are they off? Do you know the offset by any chance?

That "bullbar" keeps me smilin'.

what ar teh hubs off? or are they redrilled?

they are CSA edge rims. 15*6.5" with 4/100 stud pattern and 38 positive offset. As per a pulsar or a lancer. i don't remember which. I had the spiggot supports taken down to 54mm on the front and there isn't a spiggot support on the rear. It isn't possible to keep any spiggot support on the rear hub. I can have the conversion done for others for $350 and postage if any other person wants a better choice of rim. ADR compliance is my next move. So best for others to wait if they want a lawful setup.

Gee, that'd be the only part of my car that's legal....

is that a winch in your front bar or r u just happy to c my bumper? lol

8000 pounds of Warn pulling power . . . actually it's still not installed properly, wanna tie it back into the engine crossmember.

Pulsar makes sense. Seen it a bit up here actually - wondered what was used.

With shiny new rims like that ya'll will need to polish up the front bumper to suit

Just had another look, what are the clear side indicator repeaters off ? They look a lot better than the stock ones

look like late model lancer items,

http://ausubaru.com/main/modules.php?na ... opic&t=747
This post explains all that has happened to this brumby. side indicators are off wrx (98 to 00) i think. bought off e-bay.