RX Leone LSD Diff

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

RX Leone LSD Diff

Post by AlpineRaven » Sun Oct 23, 2005 9:16 pm

I've sourced an RX Leone rear diff (not recently, ages ago), yes its 4.11 LSD from an Automatic RX Turbo. Now I wanna to know if I could change the crown from 41 teeth down to 37 teeth to match the AWD gearbox. Can it be possible to do that myself at home? or do I require special tools? Will the bolt holes fit? (I'm getting the 37 teeth crown from an 89 L series wagon) as my rear diff that I'm suspicious that is worn out as it makes whine noises, and while I am changing the crown over, is there any notices that I should do while its taken apart ie. New seals etc?
Thanks
AP

User avatar
Ben
Junior Member
Posts: 853
Joined: Tue Oct 04, 2005 10:00 am
Location: Coffs Harbour, North Coast NSW

Post by Ben » Sun Oct 23, 2005 9:40 pm

You can't change the front diff to 4.11 ratio, but thats ok because if your rear diff came from a Leone RX then it isn't 4.11 anyway, its a 3.9, or maybe a 3.7.....

I can't remember because I haven't thought about this for a while...

Please watch before posting!


http://www.albinoblacksheep.com/flash/posting

Image

User avatar
Suby Wan Kenobi
General Member
Posts: 1914
Joined: Tue Oct 04, 2005 10:00 am
Location: Sunny Godwin Beach Qld

Post by Suby Wan Kenobi » Sun Oct 23, 2005 9:47 pm

If it came from an auto RX turbo it would be a 3.7. If it is a 4.11lsd its from a Ej powered car. to swap the 4.11 lsd to the 3.7 just get a 3.7 open diff and swap out the centre of the lsd using the outer cups from the donor diff and shims. you will have to recess the non lsd housing for clearance to one side.

User avatar
kiwi_subaru
Junior Member
Posts: 21
Joined: Mon Feb 06, 2006 10:00 am
Location: Timaru new zealand

Post by kiwi_subaru » Tue Feb 07, 2006 3:53 pm

i have a 3.7 lSD diff for sale.

User avatar
vincentvega
Senior Member
Posts: 2446
Joined: Tue Oct 04, 2005 10:00 am
Location: Brisvegas
Contact:

Post by vincentvega » Tue Feb 07, 2006 4:35 pm

Auto turbo RX was 3.9 rear wasnt it? and a 3.7 front with 1:1.1 transfer

I remember this as the brumby we did with ea82t auto we left the standard rear 3.9 in there and bolted up the auto box to it without issues

User avatar
legacytt
Junior Member
Posts: 215
Joined: Thu Oct 06, 2005 10:00 am
Location: Launceston,Tas

RX

Post by legacytt » Wed Feb 08, 2006 7:48 am

Auto RX is 3.7 and come standard with open diff not LSD.
Gen 1 Legacy GT 3inch lift and 28's

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Wed Feb 08, 2006 7:22 pm

vincentvega wrote:Auto turbo RX was 3.9 rear wasnt it? and a 3.7 front with 1:1.1 transfer

I remember this as the brumby we did with ea82t auto we left the standard rear 3.9 in there and bolted up the auto box to it without issues
only the tourers had the reduction the turbo auto rear diff is 3.7
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

Post Reply

Return to “Subaru Chat”