Liberty Nudge bars
Liberty Nudge bars
I've been after 1 since I got my lib.
I've seen a few around (bolted to other libs), and just wanted to know where/how people got ahold of them, I went to Subaru, and they said they don't do genuine and they were all most likely from 'Suba extreme'.
I guess this could be a plausible explanation, but all the nudge bars seem to be just on standard (straight from the factory) libs. So it seems weird so any people have gone out and found a suba extreme bar to bolt onto their factory lib!? The ones I'm talking about are the upside down U bars.
But today at my local wreckers I saw a different kind of bar, one that just has two horizontal bars that run along the bottom of the head lights, I imagine and the bars are spaced about 6"s apart. Just wondering if anyone knows of this type, where it would be from etc...
Anyhoo, I might ask them for a price tomorrow and see what they say, can anyone suggest a price I should pay for it?
I've seen a few around (bolted to other libs), and just wanted to know where/how people got ahold of them, I went to Subaru, and they said they don't do genuine and they were all most likely from 'Suba extreme'.
I guess this could be a plausible explanation, but all the nudge bars seem to be just on standard (straight from the factory) libs. So it seems weird so any people have gone out and found a suba extreme bar to bolt onto their factory lib!? The ones I'm talking about are the upside down U bars.
But today at my local wreckers I saw a different kind of bar, one that just has two horizontal bars that run along the bottom of the head lights, I imagine and the bars are spaced about 6"s apart. Just wondering if anyone knows of this type, where it would be from etc...
Anyhoo, I might ask them for a price tomorrow and see what they say, can anyone suggest a price I should pay for it?
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Only thing i can tell you that Liberty Ski FX had them from factory but they were fitted poorly - they would be attached on the tow hooks with large bolts - very dodgy but that how they were, my wagon had it but I took it off as I didnt really like it...
Cheers
AP
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Ski FX - there was 2 different models -Bumpty wrote:Alpine Raven - What kind did it have, have any pics?
Chubby - Same here mate, if I can't find one (or the wreckers ask too much for this one I've found) a mate is going to help me with making one..
1996 Ski FX was standard GX with mags, roof ranks & nudge bar also stickers.
1997 Ski FX was standard GX with mags (same as 96), roof ranks, nudge bar, sunroof & also stickers.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

I tried bolting my bullbar to my series 1 today but didnt fit well so I have decided to make up my own nudge bar unless I find one available on a tight budget!
87 targa brumby (Neglected),
92 targa brumby (weekend runabout),
97 Lifted Outback (Dailey drive),
05 outback safety (Too cheap to pass up),
90 model liberty (was to be scrapped instead sold to workmate)
+ others.
92 targa brumby (weekend runabout),
97 Lifted Outback (Dailey drive),
05 outback safety (Too cheap to pass up),
90 model liberty (was to be scrapped instead sold to workmate)
+ others.
- INEEDABEER
- Junior Member
- Posts: 429
- Joined: Wed Sep 05, 2007 8:38 pm
- Location: River Heads,QLD
Don’t forget about airbag compatibility with the later model Subaru’s!!!!!!
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
I forgot about the airbags in mine, maybe Cav if JP could make some I would be in for one, I know he dose good work and would be worth it.
let us know how you get on.
Rik.
let us know how you get on.
Rik.
[SIGPIC][/SIGPIC] Im now all grown up to an outback with a 2" lift and outback struts, ready to go off road and take on the world.
- SUBIIE
- Junior Member
- Posts: 154
- Joined: Wed Oct 26, 2005 10:00 am
- Location: Kangaroo Valley
- Contact:
right fellas,
you want the best looking front end you can get then the nudge bars the way to go.
Mounted on a 1992 Liberty S1 G2 RS wagon.
I had mine made up at SubaExtreme, by Jodi when it was located up on the sunny coast of QLD.
It cost me from memory $440 plus $50 delivery.
I ran a set of IPF spotlights on it and it really set the car apart.
http://www.geocities.com/subaru18004wd/RSliberty.html
SubaExtreme is now located in Goulburn in NSW and the company still make that nudge bar. If you are tight on cash i would holdout until you can get one made professinally that looks good.
http://www.subaxtreme.com.au/
you want the best looking front end you can get then the nudge bars the way to go.
Mounted on a 1992 Liberty S1 G2 RS wagon.
I had mine made up at SubaExtreme, by Jodi when it was located up on the sunny coast of QLD.
It cost me from memory $440 plus $50 delivery.
I ran a set of IPF spotlights on it and it really set the car apart.
http://www.geocities.com/subaru18004wd/RSliberty.html
SubaExtreme is now located in Goulburn in NSW and the company still make that nudge bar. If you are tight on cash i would holdout until you can get one made professinally that looks good.
http://www.subaxtreme.com.au/
1992 'Annivesary' Subaru Brumby, amp-6x9"'s-kevlar 6"'s-tweeters, power windows, and a 1995 WRX EJ20t engine finally installed, engineered and blue slipped. Wow, try and catch me up the mountain!
http://www.ausubaru.com/forum/showthread.php?t=13343
The horse feed car; 1988 subaru brumby, targa top, and in need of some tlc.

http://www.ausubaru.com/forum/showthread.php?t=13343
The horse feed car; 1988 subaru brumby, targa top, and in need of some tlc.

Yes SubaXtreme do make nudge bar for the Ser1/2 there about $650 + P&H.
chubby37 - I have been so busy with the birth of my bub & trying to finish my car I have ran out of time. It is still on the 'To Do' list......
chubby37 - I have been so busy with the birth of my bub & trying to finish my car I have ran out of time. It is still on the 'To Do' list......
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
SUBIIE,
the guy that we were thinking of getting to make up some nuge bars is JP, he is the other harf of the old SubaExtreme, Jodi was the front man, JP was the man behind the sine.
John Petersen or JP was the man who MADE the stuff and was making stuff for Subys long befor Jodi and SubyExtreme got together and still has his own fabrication busines and dose a lot with QR (Queensland Rail).
If john dose not know how to make a nuge bar for a suby then its a sad sad day for all suby lovers everywere.
Rik.
the guy that we were thinking of getting to make up some nuge bars is JP, he is the other harf of the old SubaExtreme, Jodi was the front man, JP was the man behind the sine.
John Petersen or JP was the man who MADE the stuff and was making stuff for Subys long befor Jodi and SubyExtreme got together and still has his own fabrication busines and dose a lot with QR (Queensland Rail).
If john dose not know how to make a nuge bar for a suby then its a sad sad day for all suby lovers everywere.
Rik.
[SIGPIC][/SIGPIC] Im now all grown up to an outback with a 2" lift and outback struts, ready to go off road and take on the world.
Good looking bar!
Thats what I am after. Anyone know who makes them?
- vincentvega
- Senior Member
- Posts: 2446
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Brisvegas
- Contact: