What did you do to improve your soobie today

revmax · Post by **revmax** » Fri Feb 03, 2012 7:55 pm

what is that off Guy

Tweety · Post by **Tweety** » Fri Feb 03, 2012 8:32 pm

fitted vents to my heaters on my ea81 trike. see that thread.

guyph_01 · Post by **guyph_01** » Fri Feb 03, 2012 9:08 pm

Its from a 92 gx liberty:)

NachaLuva · Post by **NachaLuva** » Sat Feb 04, 2012 12:32 pm

Very clever Guyph, you'll never lose it again

niterida wrote:Not finished yet but started making a tow ball mount for my bull bar

Why do you want that?

Do you think a bullbar is strong enough to use as a recovery point?

revmax wrote:That looks pretty neat Tweety.

BOO one of them 36mm sockets is essential when a own a soobie.

Yeah Tweety, looks pretty flash

Why do you need a 36mm socket?

NachaLuva · Post by **NachaLuva** » Sat Feb 04, 2012 12:52 pm

These arrived yesterday:

...to go on this:

:mrgreen::mrgreen:

Battlewagon · Post by **Battlewagon** » Sat Feb 04, 2012 6:23 pm

Fitted a new water pump and thermostat to the quadcam ej25, managed to put a new timing belt kit on unassisted, and got it right first time thanks to instructions from this site.

You guys rock.

thunder039 · Post by **thunder039** » Sun Feb 05, 2012 9:57 am

nachaluva wrote:These arrived yesterday:

...to go on this:

:mrgreen::mrgreen:

looks unreal!!!!

Tweety · Post by **Tweety** » Sun Feb 05, 2012 10:27 am

looks great Thunkder 039.

Finished my heaters.

a bit of guttetguard and red paint for the vents.

should I have stuck to black????

YouTube · Post by **El_Freddo** » Mon Feb 06, 2012 11:36 am

nachaluva wrote:Why do you need a 36mm socket?

The 36mm socket is for the castle nut in the centre of your hub on the MY's and L series. For the liberty onwards I think it's a 32 - I found that out the hard way the other day on my mate's foz...

Cheers

Bennie

taza · Post by **taza** » Sun Feb 12, 2012 9:39 pm

My supercharger project progress

The battery relocation.

The charger before modifying it to fit in the foz engine bay.

The mounting bracket for the charger..

I should be mounting it tomorrow and hooking everything up if all goes to plan! Can't wait.

taza · Post by **taza** » Sun Feb 12, 2012 9:40 pm

One last pic.

And Thanks to guyph for the help and letting us use the welder. Still much work to do with it and once the foz is done we are doing a 2.5l outback!

Post by **Alex** » Sun Feb 12, 2012 9:47 pm

Finished up my liberty finally.

It now has

-new front cvs
-lowered king springs
-brakes redone
-blitzen front bumper that I imported from Japan.
-gold rays wheel nuts

I might send her off to get afew bits painted as the new front bumper so slightly a different shade.

Sent from my HTC Velocity 4G using Tapatalk

taza · Post by **taza** » Sun Feb 12, 2012 9:52 pm

Alex wrote:

Finished up my liberty finally.

It now has

-new front cvs
-lowered king springs
-brakes redone
-blitzen front bumper that I imported from Japan.
-gold rays wheel nuts

I might send her off to get afew bits painted as the new front bumper so slightly a different shade.

Sent from my HTC Velocity 4G using Tapatalk

Looks sick mate, still got the neons behind the front grille?

guyph_01 · Post by **guyph_01** » Sun Feb 12, 2012 10:01 pm

No probs taza, anytime.. Wow Alex, definitely one of a kind. Gd job... Just needs a little yellow and red paint and it should be sweet...

Post by **Alex** » Sun Feb 12, 2012 11:03 pm

taza wrote:Looks sick mate, still got the neons behind the front grille?

Haha, all the neons are gone.

I'm also pulling all the pink sti bits off.

Thanks guy. I'm pretty happy with its new face

Sent from my HTC Velocity 4G using Tapatalk

ScubyRoo · Post by **ScubyRoo** » Mon Feb 13, 2012 8:19 am

Taza, have you got a seperate thread for the supercharger install? What other supporting mods? From what I read online they're not cheap as a kit - where'd you source yours?

taza · Post by **taza** » Mon Feb 13, 2012 10:45 am

ScubyRoo wrote:Taza, have you got a seperate thread for the supercharger install? What other supporting mods? From what I read online they're not cheap as a kit - where'd you source yours?

No, I need to start one. Will get onto that tonight

I got mine from ebay, bought 2 of them and got a deal. One for my 2.0l foz and the other for a mates 03 2.5l Outback.
All up the cost to setup and install is only about $700, cheaper than a raptor kit of $4000.

ScubyRoo · Post by **ScubyRoo** » Mon Feb 13, 2012 10:52 am

Awesome, looking forward to reading the thread when it comes around. Keeping all internals stock?

taza · Post by **taza** » Mon Feb 13, 2012 11:05 am

ScubyRoo wrote:Awesome, looking forward to reading the thread when it comes around. Keeping all internals stock?

Yep for now, a rebuild will probably come along this year. Atleast that way everything is in top condition and running like new.

I have to add a rising rate fuel pressure regulator too so I don't starve the engine an possibly a resistor on the air flow meter to trick the ECU. But I will see how it goes first, im sure a few tweaks will need doing.

thunder039 · Post by **thunder039** » Mon Feb 13, 2012 1:28 pm

i am also looking forward to the build thread! will be good to see how it all fits and runs.
Alex the lib looks great and damn its low