rain water still good for alloy blocks etc ?

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

rain water still good for alloy blocks etc ?

Post by steptoe » Tue Dec 29, 2015 10:23 am

I dunno if it is an old wifes tale being spread long ago but was said rain water was better for radiators than treated tap water. The tale is as old as cast iron blocks and heads in our old family bangers of the day.

Anyone know if same is said for our alloy subes ?

Or does coolant concentrate eliminate any benefit of rainwater anway ?

read count currently "0"

User avatar
Silverbullet
Senior Member
Posts: 2878
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Tue Dec 29, 2015 12:08 pm

I just use the pre-mixed stuff and be done with it :rolleyes: It's not that expensive.
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Tue Dec 29, 2015 1:28 pm

Rain water is better than tap water (sometimes way better, depending where you are in this big brown land) but it still contains some minerals that can lead to deposits in cooling systems so either use premix as SB does, or buy your coolant concentrate and only mix with demineralised water. Its only a few bucks for 4 litres from Coles etc.:)

User avatar
Cliff R
General Member
Posts: 1061
Joined: Sat Feb 07, 2009 11:07 am
Location: Muswellbrook/NSW

Post by Cliff R » Tue Dec 29, 2015 3:23 pm

I just buy the pre mixed stuff with a good boiling range and stick that in.

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed Dec 30, 2015 1:52 pm

The biggest problem with water in Australia is the mineral salts content and we are lucky enough to have quite a large range of salts :)

Calcium, lime and phosphates are the main problem apparently.

Distilled, de-ionised or de-mineralised water is better than tap water but more expensive than rain water :)

If you change your coolant every 12 months and flush it with radiator flush following the directions on the bottle it wouldn't reallty matter what water you use.

Having said all that I use tectalloy gold concentrate (green) and tap water, in the brumby and the vortex. I have used this in every other Subaru I've owned apart from my wifey's Forester which has genuine Subaru coolant in it. I flush the engines and radiators every year and so far have not had a problem.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
poprock1
Junior Member
Posts: 93
Joined: Sat Oct 09, 2010 1:33 pm
Location: hunter valley

ghost of radiators past

Post by poprock1 » Thu Dec 31, 2015 1:32 pm

Maybe it was before the industrial revolution:cool:

User avatar
poprock1
Junior Member
Posts: 93
Joined: Sat Oct 09, 2010 1:33 pm
Location: hunter valley

KM sherpa

Post by poprock1 » Thu Dec 31, 2015 1:36 pm

Just joking. Auto Pro seemed discombobulated when I asked for swaybar rubbers for the Sherpa. Sales assistant asked why I was bothering with something that old. Any polite suggestions as to where to get them?

User avatar
Nubaru
Junior Member
Posts: 165
Joined: Fri Jan 10, 2014 8:02 am
Location: within the girth

Post by Nubaru » Fri Jan 01, 2016 6:11 am

a suspension specialist, but would best have sample in hand with measure of bars diameter and maybe the brackets it has to fit into - see if they can match it up by specs rather than car specifically. Subaru dealer would also be a good start
member since 10january2014 #6191

Post Reply

Return to “Subaru Chat”