believe it or not

_curlie_ · Post by **_curlie_** » Fri Aug 11, 2006 9:29 pm

yes i started playing with the car today and 4 hours later i had replaced the inner bushes on the lower control arms

yes i know that i was slow at it but hey slow or not i am ploud of the job i did

MUDRAT · Post by **MUDRAT** » Fri Aug 11, 2006 10:00 pm

Nah nah, well done. How did you get them out?

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Fri Aug 11, 2006 11:01 pm

Well done Curlie, next time something breaks i expect you to be in there fixing it.

_curlie_ · Post by **_curlie_** » Sat Aug 12, 2006 4:42 am

getting them out was easy
i put the lower control arm in a vice then slipped a bolt into the bush and tapped the head of the bolt with a hammer and the whole bush fell out

_curlie_ · Post by **_curlie_** » Sat Aug 12, 2006 4:43 am

oh subi won

i can only do as i learn mate so the more u teach me the more i can try

chubby37 · Post by **chubby37** » Sat Aug 12, 2006 9:14 am

good job mate...your getting the hang of it all now....

stamp_licker · Post by **stamp_licker** » Sat Aug 12, 2006 1:01 pm

good stuff curlie:) might have to get you to give me a hand now you know what you're doing

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Sat Aug 12, 2006 9:43 pm

I taught you how to weld up your lift kit so you should be ok with that now too???????????

Post by **Captain Obvious** » Tue Aug 15, 2006 6:57 am

good work curlie next you will be rebuilding the whole car !!!!!

Subaman · Post by **Subaman** » Tue Aug 15, 2006 11:00 am

Nice work Curlie, you have earnt one extra ration of fairy bread