hi there
-
subieguy73
- Junior Member
- Posts: 2
- Joined: Tue Aug 05, 2008 10:06 pm
- Location: Lawson, Blue Mountains
hi there
Just Joined, Yay, Wanted To Say Hi To All. I`ll Be Adding Pics Of My Baby, Which Is A 91 Liberty Wagon Gxawd. I Do Have A ? Hopefully Someone Can Help Me. Im Looking To Adding A Turbo. What Type Would Best Suit My Liberty. Thanx.
-
El_Freddo
- Master Member
- Posts: 12628
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Hey Subieguy,
Welcome to the forum! Make sure you post a pic and a little bit about you in the New Member's section.
Do a search about the turbo conversion, there is a pile of info in here. Bascially you'll need a donor car or half cut - WRX is usually the go. From this you'll need the motor, turbo, dump pipe, ECU, ECU loom to engine and the gearbox if you want.
The rest will have been covered, you'll need to splice the donor engine loom into your Liberty's loom - some say its the hardest part of the conversion.
Be prepared for blood, sweat and at times, tears!
Bennie
Welcome to the forum! Make sure you post a pic and a little bit about you in the New Member's section.
Do a search about the turbo conversion, there is a pile of info in here. Bascially you'll need a donor car or half cut - WRX is usually the go. From this you'll need the motor, turbo, dump pipe, ECU, ECU loom to engine and the gearbox if you want.
The rest will have been covered, you'll need to splice the donor engine loom into your Liberty's loom - some say its the hardest part of the conversion.
Be prepared for blood, sweat and at times, tears!
Bennie
