Page 1 of 1
KF Laser seats in Brumby
Posted: Tue Apr 28, 2009 9:54 pm
by TW83
Hi, just a note to let ppl know that KF Laser seats are an easy conversion for MY/Brumby. All I had to do was elongate 1 hole in each of the Brumby seat rails by about 1mm and they bolted straight in.
Posted: Tue Apr 28, 2009 10:59 pm
by mattl200
same a pretty well all the mazda seats
i have late 80s mazda 929 seats in mine
Posted: Wed Apr 29, 2009 9:07 am
by rubisubi
Cheers mate, thats good to know seeing as though im looking for replacements for mine, some pics would be great as well.
Posted: Wed Apr 29, 2009 9:43 am
by steptoe
I have pair from mazda 626/ Ford telstar from 89 - 91 , feel so comfy in mazda and the grey trim is factory look match BUT they were a bastard to fit up - to the stage that when I finished the RHS I gave up on the left until another time. The RHS has me hitting the hood lining of the Brumby so plan to sell to a shorter Brumby owner I know !
TW83 - how tall are you, and what sort of clearance do you have, sit higher, lower or the same? Jonno
Posted: Wed Apr 29, 2009 7:10 pm
by TW83
The seat is probably about 50mm higher than the standard seat.
I am 179cm but suffer 'ducks disease' ie. short legs and long body, and tend to sit about the same height as someone 183cm tall. My head is about 100mm from the roof lining and I get out with no worries about hitting my head on the frame.
Posted: Wed Apr 29, 2009 9:41 pm
by brumbee
how would you describe the comfort of a laser seat?
Posted: Wed Apr 29, 2009 10:01 pm
by TW83
Firm. Certainly not as comfortable as say a Liberty seat but a lot better than a broken Brumby seat. I haven't driven it on any long trips but it feels supportive and strong.
Posted: Thu Apr 30, 2009 1:22 am
by steptoe
thanks for the um, answer. I suppose there was also varying comfort levels available within KF Lasers too , like the turbo AWD one!
Posted: Thu Apr 30, 2009 8:03 pm
by TW83
Hope this helps!