Page 1 of 1
how to find out make year of engine
Posted: Mon Oct 12, 2009 11:55 am
by Leo
hi, i have a brumby and i just put a wrx engine in that i got out of another brumby, just wondering how i can find out what year model the engine is??
Posted: Mon Oct 12, 2009 11:57 am
by AndrewT
The month/year of manufacture is on the under side of the oil cap.
Although of course there is no garantee the oil cap hasn't been swapped from some other motor.
Posted: Mon Oct 12, 2009 7:31 pm
by wrxer
early rex motors had the crooked tmi and the intake to head bolts were in a line from about 1996-98, plastic header tank, somewhere about 96 had the td05 turbo. later wrx had the tmi straight and intake to head bolts were staggered, ally header tank, these were used from about 98 till 02 (certainly bug eyes not sure about blob/drop eyes). any newer than that and subaru went variable cam timing, identifiable by big lumps in front plastics over the intake cam pulleys. i think there wasnt much else done until we got 2.5 wrxs.
this info is only from the top of my head and should be used only as a guide, plenty of others here will have actual years and more changes
Posted: Tue Oct 13, 2009 9:23 am
by El_Freddo
AndrewT wrote:The month/year of manufacture is on the under side of the oil cap.
Although of course there is no garantee the oil cap hasn't been swapped from some other motor.
Hehehe... I had a look at mine - it said 9/1 so I'm guessing that means '91 which is what I pulled the motor from. Did the Gen 2's come in at 1991?
Cheers
Bennie
Posted: Tue Oct 13, 2009 8:22 pm
by AlpineRaven
El_Freddo wrote:Hehehe... I had a look at mine - it said 9/1 so I'm guessing that means '91 which is what I pulled the motor from. Did the Gen 2's come in at 1991?
Cheers
Bennie
Nah Gen 2 started to came in early 1994. My oil cup shows something/96 as well.
Cheers
AP
Posted: Tue Oct 13, 2009 10:55 pm
by AndrewT
yeah that'd be a 91 oil cap bennie. there should be another slightly smaller number to indicate the month
