In need of vortex parts....

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

In need of vortex parts....

Post by guyph_01 » Mon Oct 10, 2011 5:28 pm

Hi guys,

I need a few bits and pieces for my vortex. Wandering if any of the vortex fans have any of those bits extra sitting in there garage...
Thx

Passenger door switch/handle trim
Image

Driver side 'small' Air vent, the one in the speedo dash trim surround.
Image

Center console arm rest/lid
Image

Heater control knob (FOUND)
Image

Ash tray
Image

Both rear seat belt top cover trims (FOUND)
Image

Driver side middle seat belt cover trim (FOUND)
Image


I'm sure i'll add a few other stuff.
Happy to get the parts internationally from T'subaru or Gilles:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
Johnny T
Junior Member
Posts: 276
Joined: Mon Mar 08, 2010 10:06 pm
Location: VIC - Frankston Area

Post by Johnny T » Mon Oct 10, 2011 6:14 pm

Have you check your wreckers? if the weather is good this weekend i'll check a few down my end and let you know :)

Im just looking for the rear disister (how ever you spell it) button, but thats as rare as hens teath lol.

good luck with your search
________________________________________
Johnny T
88kw of fun waiting to happen
Top
User avatar
subius
Junior Member
Posts: 201
Joined: Thu Oct 06, 2005 10:00 am
Location: Hobart, Tas

Post by subius » Mon Oct 10, 2011 7:01 pm

I have a parts car. white, 85 tex, with blue interior.

most of which i don't need. I should be able to get you most of what you need except the heater buttons, I think I need those for mine.

off to QLD for the rest of the month and the car is at my parents place so might be a while before I can get down there to check the car.


Cheers
Sam
89 L wagon: twin carbs, kings, kybs, 2" lift, rear discs, clutch lsd, L awd box, Kumho KL71 27s
85 Vortex: ej20 G, awd, 5 stud, 17's, almost on the road!
88 Bush basher L wagon: Welded rear diff
MY10 GEN5 Outback: white, and completely normal
Top
User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:
Contact TOONGA

Post by TOONGA » Tue Oct 11, 2011 10:15 am

guyph_01 wrote:
Passenger door switch/handle trim
Image

Driver side 'small' Air vent
Image
hijack begins

Yep I would love the switch for the passenger side door as well :)

Im actually looking for the stalks with the wiper controls and the light controls

hijack ends

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces
Top
User avatar
subius
Junior Member
Posts: 201
Joined: Thu Oct 06, 2005 10:00 am
Location: Hobart, Tas

Post by subius » Tue Oct 11, 2011 4:10 pm

ha, i had a feeling this might happen... :)

mine is a series 1 vortex so the electric window switches are different, hopefully the surround is the same. Should be.

Can't have the stalk with the lights and wipers, i need that.

plus they are different between series 1/2, so might not work depending on what you have.
89 L wagon: twin carbs, kings, kybs, 2" lift, rear discs, clutch lsd, L awd box, Kumho KL71 27s
85 Vortex: ej20 G, awd, 5 stud, 17's, almost on the road!
88 Bush basher L wagon: Welded rear diff
MY10 GEN5 Outback: white, and completely normal
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Tue Oct 11, 2011 4:52 pm

I'd be keen on the surround and switch then. I kinda like the series one switch better. I'll take a pic of the plug see if they are similar:)

Would you have a set of series 1 surround and switches?
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Tue Oct 25, 2011 3:58 pm

Thx to Coupe i was able to get:

Drviers external side windscreen trim
Heater control knob
Both rear seat belt top cover trims
Driver side middle seat belt cover trim

Bump and still need the rest:)
Thx
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
H-top
Junior Member
Posts: 782
Joined: Thu May 22, 2008 4:27 pm
Location: Brisbane

Post by H-top » Tue Oct 25, 2011 4:28 pm

I have an ashtray and centre console lid, pm me
H-Top

rolling in

MY00 GT Foz - Auto, Turbo, Luxury

Image
Top
User avatar
Brumby91
Junior Member
Posts: 75
Joined: Sun Sep 11, 2011 4:43 pm
Location: South Australia

Post by Brumby91 » Tue Oct 25, 2011 9:51 pm

I'm after the rear disk brake set up, I know hard to get , but if you don't ask you want get!
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Tue Oct 25, 2011 9:55 pm

brumby91 wrote:I'm after the rear disk brake set up, I know hard to get , but if you don't ask you want get!
I'll put the one on the car for sale once i convert it to 5stud:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
Brumby91
Junior Member
Posts: 75
Joined: Sun Sep 11, 2011 4:43 pm
Location: South Australia

Post by Brumby91 » Tue Oct 25, 2011 10:23 pm

guyph_01 wrote:I'll put the one on the car for sale once i convert it to 5stud:)
Sweeeeeet:mrgreen:
Top
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Thu Oct 27, 2011 4:08 pm

guyph_01 wrote:I'll put the one on the car for sale once i convert it to 5stud:)
What sort of outrageous price would they go for?
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Thu Oct 27, 2011 4:43 pm

Like someone i know likes to say to me every time, MILLIONS!!!!!!:p


Pretty sure you know him very well too:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Thu Oct 27, 2011 5:32 pm

guyph_01 wrote:Like someone i know likes to say to me every time, MILLIONS!!!!!!:p


Pretty sure you know him very well too:)
That's only cause I know you sell all those parts and are rich :mrgreen:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Thu Oct 27, 2011 6:19 pm

What parts? Rich??? you lost me:p
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Thu Oct 27, 2011 6:23 pm

same reply I get from a wrecker cum storage facility owner whenever I am chasing parts
Top
User avatar
shuffbag
Junior Member
Posts: 564
Joined: Fri Feb 15, 2008 3:10 pm
Location: adelaide

Post by shuffbag » Thu Oct 27, 2011 9:37 pm

im chasing the little buttons off the stalks (vent controls etc) if someone can supply?
Image
Top
User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Mon Dec 12, 2011 10:22 pm

Bump, Still need the bits:) Happy to swap for other parts i've got...

I know where i could find most of the parts but the drive to Australind is considerable and they might be more heavily guarded than a bank!!!
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Top
User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Dec 13, 2011 7:37 am

I'm jumpin in to say I could do with a pair of plastic trims that must fit to where the rear seat belts poke out at the top - just a picture of what they look like for starters would help. Grey please :)
Top
User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:
Contact TOONGA

Post by TOONGA » Tue Dec 13, 2011 8:56 am

guyph_01 wrote:Bump, Still need the bits:) Happy to swap for other parts i've got...

I know where i could find most of the parts but the drive to Australind is considerable and they might be more heavily guarded than a bank!!!
whats that? you want to die slowly in an open grave filled will wolverines.

I've been in contact with one of our American counterparts and he is still looking as well.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces
Top
Post Reply

Return to “Subaru Chat”