Page 1 of 2
In need of vortex parts....
Posted: Mon Oct 10, 2011 5:28 pm
by guyph_01
Hi guys,
I need a few bits and pieces for my vortex. Wandering if any of the vortex fans have any of those bits extra sitting in there garage...
Thx
Passenger door switch/handle trim
Driver side 'small' Air vent, the one in the speedo dash trim surround.
Center console arm rest/lid
Heater control knob (
FOUND)
Ash tray
Both rear seat belt top cover trims (
FOUND)
Driver side middle seat belt cover trim (
FOUND)
I'm sure i'll add a few other stuff.
Happy to get the parts internationally from T'subaru or Gilles:)
Posted: Mon Oct 10, 2011 6:14 pm
by Johnny T
Have you check your wreckers? if the weather is good this weekend i'll check a few down my end and let you know
Im just looking for the rear disister (how ever you spell it) button, but thats as rare as hens teath lol.
good luck with your search
Posted: Mon Oct 10, 2011 7:01 pm
by subius
I have a parts car. white, 85 tex, with blue interior.
most of which i don't need. I should be able to get you most of what you need except the heater buttons, I think I need those for mine.
off to QLD for the rest of the month and the car is at my parents place so might be a while before I can get down there to check the car.
Cheers
Sam
Posted: Tue Oct 11, 2011 10:15 am
by TOONGA
guyph_01 wrote:
Passenger door switch/handle trim
Driver side 'small' Air vent
hijack begins
Yep I would love the switch for the passenger side door as well
Im actually looking for the stalks with the wiper controls and the light controls
hijack ends
TOONGA
Posted: Tue Oct 11, 2011 4:10 pm
by subius
ha, i had a feeling this might happen...
mine is a series 1 vortex so the electric window switches are different, hopefully the surround is the same. Should be.
Can't have the stalk with the lights and wipers, i need that.
plus they are different between series 1/2, so might not work depending on what you have.
Posted: Tue Oct 11, 2011 4:52 pm
by guyph_01
I'd be keen on the surround and switch then. I kinda like the series one switch better. I'll take a pic of the plug see if they are similar:)
Would you have a set of series 1 surround and switches?
Posted: Tue Oct 25, 2011 3:58 pm
by guyph_01
Thx to Coupe i was able to get:
Drviers external side windscreen trim
Heater control knob
Both rear seat belt top cover trims
Driver side middle seat belt cover trim
Bump and still need the rest:)
Thx
Posted: Tue Oct 25, 2011 4:28 pm
by H-top
I have an ashtray and centre console lid, pm me
Posted: Tue Oct 25, 2011 9:51 pm
by Brumby91
I'm after the rear disk brake set up, I know hard to get , but if you don't ask you want get!
Posted: Tue Oct 25, 2011 9:55 pm
by guyph_01
brumby91 wrote:I'm after the rear disk brake set up, I know hard to get , but if you don't ask you want get!
I'll put the one on the car for sale once i convert it to 5stud:)
Posted: Tue Oct 25, 2011 10:23 pm
by Brumby91
guyph_01 wrote:I'll put the one on the car for sale once i convert it to 5stud:)
Sweeeeeet:mrgreen:
Posted: Thu Oct 27, 2011 4:08 pm
by RSR 555
guyph_01 wrote:I'll put the one on the car for sale once i convert it to 5stud:)
What sort of outrageous price would they go for?
Posted: Thu Oct 27, 2011 4:43 pm
by guyph_01
Like someone i know likes to say to me every time, MILLIONS!!!!!!:p
Pretty sure you know him very well too:)
Posted: Thu Oct 27, 2011 5:32 pm
by RSR 555
guyph_01 wrote:Like someone i know likes to say to me every time, MILLIONS!!!!!!:p
Pretty sure you know him very well too:)
That's only cause I know you sell all those parts and are rich
Posted: Thu Oct 27, 2011 6:19 pm
by guyph_01
What parts? Rich??? you lost me:p
Posted: Thu Oct 27, 2011 6:23 pm
by steptoe
same reply I get from a wrecker cum storage facility owner whenever I am chasing parts
Posted: Thu Oct 27, 2011 9:37 pm
by shuffbag
im chasing the little buttons off the stalks (vent controls etc) if someone can supply?
Posted: Mon Dec 12, 2011 10:22 pm
by guyph_01
Bump, Still need the bits:) Happy to swap for other parts i've got...
I know where i could find most of the parts but the drive to Australind is considerable and they might be more heavily guarded than a bank!!!
Posted: Tue Dec 13, 2011 7:37 am
by steptoe
I'm jumpin in to say I could do with a pair of plastic trims that must fit to where the rear seat belts poke out at the top - just a picture of what they look like for starters would help. Grey please
Posted: Tue Dec 13, 2011 8:56 am
by TOONGA
guyph_01 wrote:Bump, Still need the bits:) Happy to swap for other parts i've got...
I know where i could find most of the parts but the drive to Australind is considerable and they might be more heavily guarded than a bank!!!
whats that? you want to die slowly in an open grave filled will wolverines.
I've been in contact with one of our American counterparts and he is still looking as well.
TOONGA