Page 1 of 1
Bash Plate Question
Posted: Thu Sep 06, 2012 11:24 am
by Corax
Hi All,
Quick question - would a bash plate off a 2002 forester fit onto a 1999 forester? Ie are all the mounting points the same etc?
Cheers,
Corax.
Posted: Thu Sep 06, 2012 2:03 pm
by taza
Sure will Corax!
Posted: Thu Sep 06, 2012 3:52 pm
by RSR 555
Is the 2002 Foz a SF or SG model?
I would say if it's a SG sump guard then it would be close but not exactly the same as the SF model.
Posted: Thu Sep 06, 2012 4:21 pm
by taza
2002 is SF model. Only late 02 in December they changed to the SG5.
Posted: Fri Sep 07, 2012 12:11 am
by Davidov
taza wrote:2002 is SF model. Only late 02 in December they changed to the SG5.
Which means it could possibly still be a SG in 02.
Posted: Fri Sep 07, 2012 12:23 am
by taza
Davidov wrote:Which means it could possibly still be a SG in 02.
Unlikely though as not many were made in that 2nd half of the yr. They will still fit though but need modification, a grinder would work :P
Posted: Fri Sep 07, 2012 12:46 am
by RSR 555
The first SG model was release in Sept 02 in Australia. The First SG model was off the production line at FHI in early 02.
So.. it could be either. I know the likelihood of it being a SG model are slimer but you still need to make sure information given is going to be correct first.
Posted: Fri Sep 07, 2012 2:07 am
by stilson
Pfft, correct information.
What kind of a forum is this?
Posted: Fri Sep 07, 2012 3:41 pm
by RSR 555
stilson wrote:Pfft, correct information.
What kind of a forum is this?
I know hey.. sorry for dropping my standards