Matching parts

brado · Post by **brado** » Thu Nov 08, 2012 2:56 pm

Hi...Does anyone know what parts off a 87 L series will fit into either my 87 or 84 Brumby...I have a good L series but was thinking of giving it away ..just would rather take the parts if they work in the brumby..i.e Alt,starter....radiator..cheers..

dfoyl · Post by **dfoyl** » Thu Nov 08, 2012 6:09 pm

Interior light lens.

Yes, other parts fit but no net gain.

steptoe · Post by **steptoe** » Thu Nov 08, 2012 6:35 pm

gearbox, engine, rear diff and diff hanger, seats at a pinch, tyre and rim, fuel

, carb and inlet manifold, exhaust Y pipe apparently too , just bigger bore

Post by **TOONGA** » Thu Nov 08, 2012 7:01 pm

Diff hanger will not fit, the "L" series is longer... I found out the hard way.

TOONGA

steptoe · Post by **steptoe** » Thu Nov 08, 2012 9:31 pm

arr, the other diff hanger at the front of diff, not moustache bar ....at the back

Silverbullet · Post by **Silverbullet** » Fri Nov 09, 2012 4:50 pm

Seats require serious mods to fit, ask me how I know

steptoe · Post by **steptoe** » Fri Nov 09, 2012 8:24 pm

I know someone who did L seats into a Brumby and if it was too difficult at that stage in life, he would have thrown spanners, a tantrum, taught the neighbours more four letter words and likely left rubber up the driveway soon after. They went in OK, Mazda 626 1990 seats are a different story - I know from experience and two years of determination

When I first joined this forum (when the six star badged appeared on dinosaurs) there was talk of the EA82 dizzy mod to fit EA81 to get e instead of points

YouTube · Post by **El_Freddo** » Sun Nov 11, 2012 1:59 pm

steptoe wrote:there was talk of the EA82 dizzy mod to fit EA81 to get e instead of points

There are EA81 units out there with the electronic module, but you can fit the EA82 dizzy with some mods - Tweety's just done this from what I've read on this supercharger mod thread

Cheers

Bennie