Stickers
Posted: Fri Apr 25, 2014 5:25 pm
Did ausubaru.com ever have stickers made for members' cars?
One of us WA guys had special WA versions made up once too.
Best way to get one now would be to make up a batch yourself I think
The ***ALL NEW*** AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site. ***THIS IS A NEWLY DEVELOPED VERSION, NOW ONLINE SINCE SEPTEMBER 2018*** New site address: www.ausubaru.com.au !
https://ausubaru.com.au/
Stickers
Page 1 of 4
Posted: Fri Apr 25, 2014 6:26 pm
Someone did, many many moons ago.
One of us WA guys had special WA versions made up once too.
Best way to get one now would be to make up a batch yourself I think
One of us WA guys had special WA versions made up once too.
Best way to get one now would be to make up a batch yourself I think
Posted: Fri Apr 25, 2014 7:04 pm
Any original image files around? I'd be happy to enquire about getting a short run printed but faaaark designing them again.
Posted: Fri Apr 25, 2014 8:01 pm
A quick search for "stickers" and I found this from last time the WA stickers were redone. 2nd page has some graphics.
showthread.php?t=17288&highlight=Stickers&page=2
showthread.php?t=17288&highlight=Stickers&page=2
Posted: Mon Apr 28, 2014 10:39 am
Have you tried to contact Brett (Outback Bloke)? I'm sure he would have the original design
Posted: Sat May 03, 2014 10:28 am
I'm keen for a windscreen sticker - I miss mine since I had the new windscreen put in...
Cheers
Bennie
Cheers
Bennie
Posted: Sat May 03, 2014 2:57 pm
Is Outback Bloke his username?
Posted: Sun May 04, 2014 1:32 pm
Yes "Outback Bloke" is his username
Posted: Sun May 04, 2014 2:36 pm
I had a go at making a logo for everyone, if its not any good I can try and make something new, let me know what you guys think
Posted: Sun May 04, 2014 6:19 pm
That looks great for a rear window, prob also need a long thin one for across the top of the windscreen
Posted: Sun May 04, 2014 8:13 pm
thanks for that, I can make a 200mm x 900mm (200mm High x 900mm Wide) that says http://www.AUSubaru.com in the same text if you like, let me know and I can post it up
Kind regards
Johnny T
Kind regards
Johnny T
Posted: Sun May 04, 2014 8:21 pm
Just had a quick play of making a rear window sticker, it can always be changed if needed, let me know what you guys think
NT Logo ...
Posted: Sun May 04, 2014 11:43 pm
Did this one for AUSubaru NT some time ago :
Note : That would be the NT state emblem - so you can substitute your State or Territory emblem over it ...
The other Star formation is the Southern Cross ...
Might redo a text only in a single banner style ...
Cheers, Bantum ...
Note : That would be the NT state emblem - so you can substitute your State or Territory emblem over it ...
The other Star formation is the Southern Cross ...
Might redo a text only in a single banner style ...
Cheers, Bantum ...
New Banner ...
Posted: Mon May 05, 2014 1:49 am
Ok - Try this one for size :
Larger image file can be found here : http://smg.photobucket.com/user/Bantum6 ... o.jpg.html
Note : To get the Larger Image ( 800 x 100 mm ) - click on 'View Original' ( bottom right of image ) ...
PM me if you want a PDF of it ...
Cheers, Bantum ...
Larger image file can be found here : http://smg.photobucket.com/user/Bantum6 ... o.jpg.html
Note : To get the Larger Image ( 800 x 100 mm ) - click on 'View Original' ( bottom right of image ) ...
PM me if you want a PDF of it ...
Cheers, Bantum ...
Posted: Mon May 05, 2014 7:34 am
I'd be keen for a couple of stickers too
Posted: Mon May 05, 2014 12:50 pm
just measured my OffroadSubarus sticker, thats 600x50mm. 50mm would prob be the max height for the windscreen...Johnny T wrote:thanks for that, I can make a 200mm x 900mm (200mm High x 900mm Wide) that says www.AUSubaru.com in the same text if you like, let me know and I can post it up
this would be great without the flower lolBantum wrote:Did this one for AUSubaru NT some time ago :
Might redo a text only in a single banner style ...
Maybe do the badge in the traditional horizontal stars format. Would look great
Posted: Mon May 05, 2014 5:55 pm
All looking great so far! It's not that expensive/difficult to get a hundred or so stickers made up is it? Probably a run of each design would make everyone happy
Don't forget those of us with tonneu covers on our utes! mine covers the bottom 1/3rd of the window so a full window height sticker would be no good. I like the last ones from Jonny T and Bantum.
Don't forget those of us with tonneu covers on our utes! mine covers the bottom 1/3rd of the window so a full window height sticker would be no good. I like the last ones from Jonny T and Bantum.
Posted: Mon May 05, 2014 7:17 pm
I'll get a few quotes.
Stickers ...
Posted: Mon May 05, 2014 10:30 pm
I would like one of each type please ... ( Mine of course )
P.S. - Don't forget that the banner can also be done just as individual letters or with a clear background + cut down to suit your application ...
I have the original file for the banner which was done in illustrator, unfortunately the badge is not & is low resolution, so would need to be redone ...
Cheers, Bantum ...
( Mine of course )P.S. - Don't forget that the banner can also be done just as individual letters or with a clear background + cut down to suit your application ...
I have the original file for the banner which was done in illustrator, unfortunately the badge is not & is low resolution, so would need to be redone ...
Cheers, Bantum ...
Posted: Wed May 07, 2014 6:30 pm
I got a few quotes to get some vinyl cut UV resistant stickers of Bantum's text only design.
580mm wide would come to about $8 each.
280mm wide would come to about $5 each.
They would be vinyl cut lettering. Once applied each part would stand as a separate sticker so there was no hazy clear section to obstruct vision. UV resistant and meant for car applications.
Prices I've mentioned above would be for a single sticker assuming a print run of 50 stickers, each posted by snail mail. I have given the above costs with a rough "break even" point of around 40 stickers sold, which I feel would be the maximum would sell.
They get cheaper the more you buy (obviously) but I just don't think there are enough members here that would buy that many and the initial outlay starts getting scary...
What do other members think?
580mm wide would come to about $8 each.
280mm wide would come to about $5 each.
They would be vinyl cut lettering. Once applied each part would stand as a separate sticker so there was no hazy clear section to obstruct vision. UV resistant and meant for car applications.
Prices I've mentioned above would be for a single sticker assuming a print run of 50 stickers, each posted by snail mail. I have given the above costs with a rough "break even" point of around 40 stickers sold, which I feel would be the maximum would sell.
They get cheaper the more you buy (obviously) but I just don't think there are enough members here that would buy that many and the initial outlay starts getting scary...
What do other members think?