Page 1 of 1
Randomly found my car on the net
Posted: Mon Jan 12, 2015 7:55 pm
by Subydoug
Down towards the bottom, subaru wagon. I think it was probably from a few years ago. I definitely didn't take those pics.
http://brakehorsepower.com.au/tag/4wd/
Regards
Doug
Posted: Mon Jan 12, 2015 10:46 pm
by taza
Nice!!! Ive seen that purple patrol around carlisle area when at tafe..
Posted: Sun May 03, 2015 12:26 am
by RSR 555
Yeah, this was the pic I saw a while ago. I think you said something about it then?
Posted: Sun May 03, 2015 10:49 am
by TOONGA
Yep very nice Doug but you need to send them an updated set of pictures
The rims, turbo and all the other mods
TOONGA
Posted: Sun May 03, 2015 10:56 am
by Subydoug
Pretty sure I emailed it to you Paul.....cant remember.
Nah Jules, I sort of like the fact it looks stock till I peel off! Does single peggers like a champ now
.
Regards
Doug
Posted: Sun May 03, 2015 1:08 pm
by El_Freddo
Next upgrade: front LSD
Next upgrade: AWD gearbox
Next upgrade: rear LSD
Next upgrade...
I know how this goes!
Cheers
Bennie
Posted: Sun May 03, 2015 10:02 pm
by Cliff R
I am guessing we are talking about the 84 MY Touring wagon.
I have to ask, as someone who has seen way too much of an MY Touring wagon roof (liable to wake up with cold sweats any day now from horror dreams) from the inside and the outside how is the sun roof fitted when there should be a roof cross channel running across the car right through the middle of the sun roof ?
When I saw the channel in my roof I thought I would have to put away any thoughts of fitting one.
Posted: Mon May 04, 2015 8:36 am
by Subydoug
I dont know whats been done Cliff, I never installed it. No doubt they just cut thru the support channel without a thought.
Regards
Doug
Posted: Mon May 04, 2015 9:03 pm
by Cliff R
Thanks Doug, I think I will need have to keep researching before I even consider hacking a roof cross channel out.
Posted: Mon May 04, 2015 9:23 pm
by Subydoug
I will have a look into it for you. They went to the effort to re-trim the roof liner so maybe they put some thought into structural integrity as well.
Regards
Doug
Posted: Mon May 04, 2015 10:10 pm
by Bantum
Hmm, I'd like to know also - Is yours a factory install, or after market jobie Doug ?
Cheers, Bantum ...