The AUSubaru.com.au Forums

Posted: **Wed Sep 13, 2006 6:14 pm**

is it possible to swap the front diff (including stub axles) from the EA81 g/box to the lib g/box?? would the diff out of the EA handle awd road driving??
Im asking this because, like everyone doin an ej conversion i have come to the point where you realise the CV's are different.....
or would i be better off using only the stub axles from the EA and using the lib diff front diff and matching rear diff?

any help appreciated
Kiel

Posted: **Wed Sep 13, 2006 7:30 pm**

You would be better of using an ea82 five speed duel range box, what are you going to be using the Subi for .

Mike.

Posted: **Wed Sep 13, 2006 8:08 pm**

Sent you a PM. E-mail me on [email protected]

Posted: **Wed Sep 13, 2006 10:58 pm**

L series stub axles worked for me, why change the diff?

Posted: **Thu Sep 14, 2006 5:55 am**

cameron wrote:Sent you a PM. E-mail me on [email protected]

If you have advice on the subject, why not share it with every one?

Posted: **Thu Sep 14, 2006 6:04 pm**

car will be used for road only driving.... but will use it for offroad when i upgrade to a better car...
i was thinking of changing the diff so the final drive ratio is the same so i can run the stock brumby 3.7 diff..

The AUSubaru.com.au Forums

ej g/box and ea g/box q

ej g/box and ea g/box q