Page 1 of 1
kyb shockies?
Posted: Fri Nov 10, 2006 12:08 pm
by subius
Hey guys,
i've got an 89 L series DL wagon with 2" lift and am looking to buy some new kybs for it.
Do they only make one type of strut for the L because i remember 90subiewgn saying he had a set of front kybs that made the car lower so i was wondering what the best ones for 4wdriving would be? Has anyone else had that happen?
any info or part numbers would be great. What sort of price should i be expecting to pay for a set all round?
cheers
Sam
Posted: Fri Nov 10, 2006 12:36 pm
by bluesteel
pretty sure there are at least 3 different spring perch heights
no idea on part numbers tho
head into a parts place and they should be able to work it out for you
Posted: Fri Nov 10, 2006 12:45 pm
by Xtreme_RX
The part numbers are:- Front
RH - 333234
LH - 333235
Rear -
RH - 341216
LH - 341216
Fronts retail for about $195ea
Posted: Fri Nov 10, 2006 1:50 pm
by BlackMale
Rear just cost me a little less then the fronts recently
Posted: Fri Nov 10, 2006 4:19 pm
by AndrewT
Alex was unfortunate enough to be supplied incorrectly with 2wd ones. That's why they were lower.
Get the correct part numbers as above and you will be the propper beefcake ones
Posted: Sat Nov 11, 2006 1:10 pm
by Alex
yeh those part nums are right..thats what ive got now!
rears cost me $100 for the pair(2wd though) they actually made the back sit seriously high..(that was with new kings as well though)
alex
Posted: Wed Nov 15, 2006 2:56 pm
by subius
sweet. i was wondering why those shocks were lower. I will get the 4wd wagon ones and fit them to some standard height heavy duty king springs
cheers for the help guys.
Sam
Posted: Wed Nov 15, 2006 3:22 pm
by robdddd
Perth.......where is the best place in perth to get some new shocks and King Springs for a lifted 1993 L sportswagon?
North of River preferably
Posted: Wed Nov 15, 2006 4:53 pm
by BlackMale
Struts = WA Suspention.
Springs = Covo's
Posted: Thu Nov 16, 2006 3:30 pm
by robdddd
Coventrys sell Standard King Springs for $138 a pair for both front and back.......didn't have a listing for "Heavy Duty"?
Just looked at teh King Springs web site and it to has only standard (KSRS-03 *) is it just the case that these standard springs are a bit more heavy duty than the original springs?
Posted: Thu Nov 16, 2006 8:23 pm
by Alex
yes the king springs are abit more heavy duty, if you compare the guage of the coil, the king are a fair bit fatter..and they are heaps stiffer..
alex