Page 1 of 3
Pictures of 90Brumby's brumby
Posted: Wed Sep 19, 2007 12:24 am
by D3V1L
just took some pics of tristans car when he came round just then....very very very impressive to say the least...its a bloody machine:twisted:
notice its got rear springs......LOL.....and the 10 inch gap between the tyres and wheel arches, and the liberty RS turbo alloys and big disk brakes
:D and the 29" all terrains
dave
Posted: Wed Sep 19, 2007 12:28 am
by bluesteel
looks the goods
go the red brumbys
Posted: Wed Sep 19, 2007 12:28 am
by Subafury
ooo yeh those 29's give it some good height!
very sexy
Posted: Wed Sep 19, 2007 12:37 am
by 90brumby
it still needs some more wrk but ye gettin there
list of things to fix
zorst
rear struts need reinforcin
tail shaft needs wrk
FRONT drive shafts
i think thats the main things
Posted: Wed Sep 19, 2007 12:57 am
by Matatak
and some strut tops
O YER loooooking gooood
now ull be pullin those nissans out liek theres no tomorrow
good to see those L plates can be turned around now
Posted: Wed Sep 19, 2007 7:06 am
by AlpineRaven
Nice ride mate! Yeah keep it up and keep us updated.. One of these Brumby would be my car one day!;)
Cheers
AP
Posted: Wed Sep 19, 2007 8:51 am
by subelover
yeah not bad nice work m8 a bit like bluesteels scrumy that has 4" lift rear pump up air shocks 30's.....ej22
Posted: Wed Sep 19, 2007 11:23 am
by BrennyV
not bad at all. some hard work looks like its been done there.
Posted: Wed Sep 19, 2007 11:55 am
by Subafury
get the rest done in the next 2 weeks and its jarrahdale time for 90brumby!
Posted: Wed Sep 19, 2007 2:28 pm
by El_Freddo
Very nice!
I love the brumby and would like one too, but currently as a student my L series is keeping me busy and my budget doesn't allow a second car let a lone a brumby!
Keep us posted
Cheers
Bennie
Posted: Wed Sep 19, 2007 2:35 pm
by Alex
noice...it looks even bigger in the flesh too
alex
Posted: Wed Sep 19, 2007 3:01 pm
by El_Freddo
So what rear end are you running under there? It looks like there's some sort of control rod coming from near the hub (i'm guessing) to near the exhaust - looks a lot like the setup on dad's clapped out rangie... Or is this a part of the coil-overs that you have on the rear?
I'd be interested to see what you've done under there.
Cheers
Bennie
Posted: Wed Sep 19, 2007 4:33 pm
by D3V1L
this brumby has the ENTIRE suspension setup from my old liberty...as in EVERYTHING...struts, lower controll arms, springs, rear diff cross member, rear struts...the absolute works.. its a work of art this machine..amazing it all fit in the car actually
Posted: Wed Sep 19, 2007 5:01 pm
by Jeff
Someones gotta ask ask did you fit a liberty rear end in a brumby? You have my attention
Posted: Wed Sep 19, 2007 6:00 pm
by 90brumby
il put a acutal list up soon but for now
it has the complete rear end of a liberty (daves old 1)
Liberty Lower control arms (front)
liberty struts
liberty tie rod ends
liberty brake booster
N basicly all the other suspension parts from a liberty
the fuel tank is out of a Lenone (thanks 4muff)
Tristan
Posted: Wed Sep 19, 2007 7:24 pm
by Jeff
Interesting but how did you mount the liberty rear crossmember to brumby floor?
Posted: Wed Sep 19, 2007 8:07 pm
by 90brumby
since devil put a few pics up i thought ill put some more up[ATTACH]424[/ATTACH]
[ATTACH]425[/ATTACH]
[ATTACH]426[/ATTACH]
[ATTACH]427[/ATTACH]
[ATTACH]428[/ATTACH]
Posted: Wed Sep 19, 2007 8:11 pm
by 90brumby
jeff to answer ur question the crossmember is bolted to a pice of C section which has been bolted throught the tray
u in WA it will make it much easyer to explain if u come c the car or somethin
Posted: Wed Sep 19, 2007 9:48 pm
by Alex
fvck that thing is mental....im in love!
alex
Posted: Wed Sep 19, 2007 9:54 pm
by 90brumby
hahah i just noticed u can c my bros liberty (the roof) through my drivers window (all this in the 2nd pic i put up)