FS Ej22 motor

Post Reply
User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

FS Ej22 motor

Post by seagull » Wed Jul 22, 2009 1:47 am

Posting for a mate , who has done a turbo conversion
Ej22 motor aprox 200,000 ks
c/w all the wiring ,ecu ,afm ect
$550.00


............................................................................................................
I also have another Ej22 long block ( cond is not known by me as I have not seen it run )
you risk it for
$40.00

User avatar
EJ22Ute
Junior Member
Posts: 53
Joined: Mon Dec 12, 2005 10:00 am
Location: Belmont WA
Contact:

Post by EJ22Ute » Wed Jul 22, 2009 1:54 am

i have a 92 ej22 wired into my ute, it needs valve stem seals and camshafts seals.
any oil leaks on the motor for sale? any idea of compression/ condition ? have any good d/r 5 sp manual awd g/boxes ?

User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

Post by seagull » Wed Jul 22, 2009 2:00 am

Hi mate I can not see any oil leaks, I removed the fly wheel & its all good there as well.sorry I can not help you with a d/r gear box at this point of time.

O , all I know the motor was a driver , There is no water in the oil.

I may be able to get my bell housing back to do a compression test

cheers

User avatar
GOD
Junior Member
Posts: 754
Joined: Sun May 04, 2008 10:04 pm
Location: Tom Price WA

Post by GOD » Wed Jul 22, 2009 3:00 am

If no one else has dibs yet, I'll take it. Need a new engine urgently. Please call/message/PM me to organise pick up. 0401 471 144.

Dane.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project

User avatar
GOD
Junior Member
Posts: 754
Joined: Sun May 04, 2008 10:04 pm
Location: Tom Price WA

Post by GOD » Wed Jul 22, 2009 3:09 am

EJ22ute, if I get seagull's engine, I'll have an unused top end gasket set available for a very good price.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Wed Jul 22, 2009 9:15 am

EJ22ute - Alex (Keffa) has a 5spd dual range gearbox forsale. A 3.7 ratio I beleive.

User avatar
red_rocket
Junior Member
Posts: 233
Joined: Mon May 22, 2006 10:00 am
Location: perth, wa

Post by red_rocket » Wed Jul 22, 2009 7:12 pm

dammit i always miss out! seconds dibs if GOD doesnt snap it up
L series project
http://www.ausubaru.com/forum/showthread.php?t=14491
Rolling in the 99 Rex though :D

User avatar
rtcb65
General Member
Posts: 1354
Joined: Sun Jul 29, 2007 1:07 pm
Location: Gympie
Contact:

gearbox

Post by rtcb65 » Wed Jul 22, 2009 7:22 pm

AndrewT wrote:EJ22ute - Alex (Keffa) has a 5spd dual range gearbox forsale. A 3.7 ratio I beleive.
I am after a awd d/r 5 speed box . Only problem is, i send heaps of messages to keffa and never get a reply. Last time i tried to contact keffa was about a clutch pack lsd diff.
rtcb65
------------------
Redneck Rick.

1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products


[SIGPIC][/SIGPIC]

User avatar
D3V1L
Senior Member
Posts: 2661
Joined: Thu Jun 01, 2006 10:00 am
Location: perth, wa

Post by D3V1L » Wed Jul 22, 2009 7:41 pm

thats caus keffa doesnt come on here anymore. its not an awd box, its a standard L series part time box


dave
no more subarus


[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9



User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Thu Jul 23, 2009 12:35 am

Actually I'll be selling an AWD one myself soon. It's a 1999 Outback gearbox, 5spd dual range with hydraulic operated push clutch. Comes with fork, slave cylinder, master cylinder, clutch, pressure plate and flywheel. Pressure plate was custom beefed up to 2200pounds and the clutch still works well - held the power of an EJ20turbo perfectly fine.
It's got probably about 280,000kms on the gearbox at an estimate, still works good. PM me if interested.

User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

Post by seagull » Sat Jul 25, 2009 12:19 pm

bump , new motor listed

Post Reply

Return to “Western Australia”