parting out a wagon

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

parting out a wagon

Post by Lapsed » Mon May 22, 2006 12:15 am

I have a 1994 l series wagon. im taking the gearbox, driveline, suspension and a few other little things. The rest is up for grab. most panels are damaged (rear & front damage). Most of the inside is there as well as well as other bits. as has an ea82 with leaking left head gasket

I will be getting rid of it by the end of the week. If you would like any bits then ask and i will put it to the side for you to collect.

leave a message or pm for the bits. as for price name it as i am not really worried about it as i have the bits i need.

chris

and it is white with blue interior

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Mon May 22, 2006 12:26 am

When you say driveline are you including the front axles? I'm after a set off an MPFI model.
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Mon May 22, 2006 12:33 am

are they different to the carby ones ??

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Mon May 22, 2006 12:54 am

They should be 25 spline inners rather than 23 spline as found on the carby models.
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Mon May 22, 2006 12:57 am

I dont know. guess i have a look and see tomorrow

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Mon May 22, 2006 12:13 pm

tim_81coupe they are 23 spindle.

User avatar
Subaman
Junior Member
Posts: 376
Joined: Wed Oct 05, 2005 10:00 am
Location: Ningi QLD
Contact:

Post by Subaman » Mon May 22, 2006 12:30 pm

The MPFI had the 23 spline inners only they were the large cups as found on the RX.

User avatar
aspro
Junior Member
Posts: 185
Joined: Wed Oct 05, 2005 10:00 am
Location: Argyle

Post by aspro » Mon May 22, 2006 2:15 pm

What are The doors like, I am after the drivers side rear door...

User avatar
Chris_Rogers
General Member
Posts: 1155
Joined: Sat Dec 31, 2005 10:00 am
Location: Brisbane
Contact:

Post by Chris_Rogers » Mon May 22, 2006 7:43 pm

radio- waht was in it? was it electronic? if so do you still have it?(I'm after the radio,brackets and facia panel.)
Audio Express

1987 HR31 Nissan skyline
1990 R32 Nissan Skyline GTS4

2006 Holden Combo - work van :)

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Mon May 22, 2006 8:23 pm

Chris_Rogers - sorry mate no radio of face plate

aspro - it is in reasonable conditon, some small dings, chips and rust but all up i would use if i needed it. will take off and put it aside for you

User avatar
Chris_Rogers
General Member
Posts: 1155
Joined: Sat Dec 31, 2005 10:00 am
Location: Brisbane
Contact:

Post by Chris_Rogers » Mon May 22, 2006 8:48 pm

bugger!
(I have found one O/S trying to get it local.)
Audio Express

1987 HR31 Nissan skyline
1990 R32 Nissan Skyline GTS4

2006 Holden Combo - work van :)

User avatar
vidler
General Member
Posts: 1055
Joined: Thu Oct 06, 2005 10:00 am
Location: Hamersley WA

Post by vidler » Mon May 22, 2006 9:40 pm

you taking the rear axles?

if not, ill grab them off ya
09 Forester XT Touring Wagon

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Mon May 22, 2006 9:43 pm

whats happening with the headlights??
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Mon May 22, 2006 10:41 pm

i have a right headlight with a chip/crack in it.

I am using the rear axles all drive line and suspension is being used

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Tue May 23, 2006 11:27 am

last call, will be gone in a day or two

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Tue May 23, 2006 4:44 pm

Need to talk to you ASAP please if you still have this.

I will PM you my details.

Note PM sent

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Tue May 23, 2006 7:37 pm

the seats are in good condition. if anyone is interested!! it would be a shame to get rid of them if someone else needs/wants them

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Tue May 23, 2006 9:17 pm

If they are free i will come get em.

Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Wed May 24, 2006 10:48 am

SuBaRiNo wrote:If they are free i will come get em.

Dave
Your a tool :D i had a set with the wreack that i said you could have!?!?!

User avatar
Lapsed
Junior Member
Posts: 556
Joined: Mon Apr 10, 2006 10:00 am
Location: Seville Grove, WA
Contact:

Post by Lapsed » Wed May 24, 2006 2:17 pm

not that cheap :) may be a few dollars SuBaRiNo and they are yours let me know today and i will take them out for you as the wreck is going tomorrow

Post Reply

Return to “Western Australia”