WA Crew is expanding

Post Reply
User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

WA Crew is expanding

Post by BlackMale » Fri Apr 07, 2006 4:14 pm

Crew,

With the lack of trips on in WA recently we have been getting phunky, and we now have a new edition to the family… No not new child we have purchased another RX :D :D

She was Stu1’s Subaru that was in the for sale section – some more details include full RX chequered interior, 3" BYB lift kit, top mount inter cooler, BOV, huge 14" Kumo mud tyres (spare has never seen daylight) as well as a few other little things, as far as I, know that are rear/hard to find Eg. Full adjustable Bilston rear suspension and I think Bilston inserts in the front, its also running a dual range AWD not sure of the ratio at this stage (imported from Japan) with a centre diff lock.

All we have to do now if figure out what to put in the wagon for an even better 4WD rig :twisted: and do we keep the RX… my thoughts are put my lowered suspension from my old red RX in for a second road/family car... decision decisions.

We'll keep you posted.

User avatar
BrennyV
Senior Member
Posts: 2573
Joined: Wed Oct 05, 2005 10:00 am
Location: Pussy Town

Post by BrennyV » Fri Apr 07, 2006 5:05 pm

sounds crazy mate, cant wait for you to bring it out@!!
[SIGPIC][/SIGPIC]
VER7 STI (FOR SALE) & RIP EJ22 AWD LEONE
PIX @ www.webshots.com/user/4muff

I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson
http://www.brainyquote.com/quotes/quote ... 02861.html

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Fri Apr 07, 2006 8:42 pm

How much work will it need to get over the pits? I heard it has a rust issue.
Good work on your purchase... now u need to start looking for subi number 3.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

Stu1

Post by Stu1 » Sun Apr 09, 2006 7:27 pm

And yet more expansion, I will soon be picking up a 97 Forrester to replace that old RX. Not a GT sadly...how will I survive without a turbo?

Stu

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Sun Apr 09, 2006 8:32 pm

ah you'll be right...won't be a huge amount slower and you only need a couple of weekends up your sleve for a WRX front-cut conversion later down the track!!

Will certainly be good to get an actual Forester in our offroading possy!

User avatar
subanator
Junior Member
Posts: 664
Joined: Fri Oct 07, 2005 10:00 am
Location: Perth WA

Post by subanator » Mon Apr 10, 2006 1:11 am

Having to choose which one to drive each day........hmmmmm?
Nice one Jaffa :D
'03 Forester X, stock standard for now.

'89 EA82T Touring Wagon, 5-speed D/R, 14" alloy wheels, bullbar. (Past ride)

'81 MY wagon, 3" lift, 5-speed D/R, Weber, 14x27" tyres. (Past ride)

User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

Post by seagull » Wed Apr 12, 2006 1:55 am

My mate max has just purchased a 90 liberty turbo wagon , so another in the wa group

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Wed Apr 12, 2006 10:22 am

seagull wrote:My mate max has just purchased a 90 liberty turbo wagon , so another in the wa group
Yer but is it lifted and is he going to bust it with us in the bush??? :roll: lol

User avatar
seagull
Junior Member
Posts: 874
Joined: Fri Nov 18, 2005 10:00 am
Location: Perth wa

Post by seagull » Thu Apr 13, 2006 1:39 am

I would say it will end up like mine

215x70R16 mud & snow
75mm lift
custom rear arms
ford ea bull bar
big front bash plate

it has the rs turbo motor in it , so it should go very well

forester_child

new member

Post by forester_child » Tue Jul 04, 2006 2:17 am

hey just introducing myself.

im ben a mate of matts (aka subi).

ive just purchused my first car and of course it had to be the best brand a subaru.

anyway ill post more later

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Mon Jul 17, 2006 3:04 pm

It has just expanded again 8O

Unexpectedly on the weekend I purchased myself a nice and clean (should read an extremely clean) little Leone Royle. It’s got the 1.8 carb donk in it and no dual range however it has grown up out west (well east of here) and is SO clean that after 18 years only has slight surface rust and some of that red dirt in some hard to get places. The mechanics are in great condition –
- Gearbox seems good and no issues there (cable is stretched to the max though).
- Engine is as quiet as you like (almost hard to tell the thing is running) and fires first time every time, has no lifter noise or anything and hums along.
- cv and rack boot have recently been split however no clicking or issues there either.
- Interior is unbelievably blue and unbelievably clean with the exception of some ball bearing gravel on the floor.
Other then this nothing special. White in colour, roo bar in good nic, 13” rims, reasonable tread on 3 of the 5 tyers blar blar blar.

Plans the initial thoughts are to put all my RX gear into it :twisted:

Watch other threads about to start for progress (or should I decide to sale or and/or parts).

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Mon Jul 17, 2006 7:53 pm

wow Jaffa's Subaru collection! Three now!
Is this one registered and what-not?

User avatar
aspro
Junior Member
Posts: 185
Joined: Wed Oct 05, 2005 10:00 am
Location: Argyle

Post by aspro » Mon Jul 17, 2006 10:54 pm

Un believable! a third!. Sounds great when does the swap start?

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Mon Jul 17, 2006 11:31 pm

Yeah it's registered.

I may have payed a slight part in talking him into buying it. Opps.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

User avatar
tim_81coupe
General Member
Posts: 1693
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by tim_81coupe » Tue Jul 18, 2006 12:06 am

Three Subarus? Sounds like someone's trying to catch up to me...

Seriously though, good buy Jaffa. Should be a cinch with the RX conversion, especially as you have an RX with which to do it!

One of these days you do need to go EJ though.... :lol:
82 MY Wagon, EJ20G

87 RX, EJ20G

89 Brumby, EA81

12 BRZ, FA20

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Tue Jul 18, 2006 12:38 am

Jaffa wouldn't know what to do with all the Torque of an EJ... LOL jokes mate.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Tue Jul 18, 2006 11:56 am

Yer i am running out of space.

We decided to go unrego at this stage (sorry Dave) as there was no point in maintaining it while we knew the thing would be off the road for a while. Rego on this will present no issues 8O

I know what we are in for now, the RX has no leaks, it will have no lift and everything else will be factory standard (well maybe not the exhaust, until it passes then the 15" rims, TMIC and BOV go back on) so will not have the problems I have had with the wagon.

There is no hope of us catching you Tim as the work on this will start sooner rather then later and i will have 2 cars and the bike.

We were thinking about the EJ option however given my collection of RX bits and how cheep we should be able to do this to get a second reliable car we could not resist… having 2 EA82T’s though will be fun, and given the AWD in the sedan I may even reconsider some tarmac rally events in the future is we are not burring $ 4WD. I will start another thread with bits that I am thinking about selling.

Post Reply

Return to “Western Australia”