Looking for a RS turbo liberty wagon ?

Lapsed · Post by **Lapsed** » Fri Sep 29, 2006 10:05 am

waggaclint wrote:just a thought but wouldnt that g-box cross-member be weaker with all those holes drilled in it....

It actually has minimal effect on the tensile stregnth of the material as long as there is sufficiant material between the holes and it is not on stress points of the item. also round holes do not provide weak points for the material to tear at, as well as it reduce the weight of the part.

seagull · Post by **seagull** » Fri Sep 29, 2006 12:14 pm

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Suba · Post by **Suba** » Fri Sep 29, 2006 12:39 pm

I would have thought that to put into stock form would be an awfull lot of work.

Mike.

Naif · Post by **Naif** » Fri Sep 29, 2006 1:21 pm

seagull, what king of bull bar is that? and what vehicle is it ment/designed for?

seagull · Post by **seagull** » Fri Sep 29, 2006 2:59 pm

Hi Mike the most work would be to cut the stainless system down after the drop to earth , all the bits just unbolt & I have the stock gear for it stock cat ect

The b bar is off a ford eb , ea fit as well most of the ford units bolt up

I have the brackets on an angle in the shot so it looks a bit bent .

vincentvega · Post by **vincentvega** » Fri Sep 29, 2006 4:07 pm

not every steering extension is welded. theres nothing at all illegal about a splined extension. scorpion do their lifts this way

vincentvega · Post by **vincentvega** » Fri Sep 29, 2006 4:10 pm

damn thats a shame. its one of the best lifted wagons i have seen done in a while and its gonna be sold as a ricer..

If you can give me a rough estimate on price i will advertise it in the QLD subaru 4x4 club mag if you like? might sell there

seagull · Post by **seagull** » Mon Oct 02, 2006 10:01 pm

sold itemssssssssssssssssssssssssssssssssss

seagull · Post by **seagull** » Tue Oct 03, 2006 1:12 pm

Please clear post as car has been sold

cheers

vincentvega · Post by **vincentvega** » Tue Oct 03, 2006 5:11 pm

wheres it off to ???

and more to the point, is it still lifted??

seagull · Post by **seagull** » Fri Oct 06, 2006 3:12 pm

perth
lifted

AndrewT · Post by **AndrewT** » Sat Oct 07, 2006 11:35 am

Was it your Dad for 10 bucks for tax purposes or whatever again?
Mabey 15 bucks cause of fuel prices??

SuBaRiNo · Post by **SuBaRiNo** » Sat Oct 07, 2006 12:31 pm

AHAHAHHA

Dave

seagull · Post by **seagull** » Sun Oct 08, 2006 12:43 am

soldddddddddddddddddddddddddddddddddddddd

BrennyV · Post by **BrennyV** » Sun Oct 08, 2006 12:56 pm

?? wtf !!!

The AUSubaru.com.au Forums

Looking for a RS turbo liberty wagon ?

Sold