EOI : Wagon Part Out Perth

Matatak · Post by **Matatak** » Tue Dec 09, 2008 9:51 pm

OK

looking to part out my MY Touring Wagon.

EJ22 running great.
Clutch and Flywheel matching Motor to Box
Custom 3 Inch Lift Kit.
5 Speed DR Box all working 3.9 ratio.
Rodeo Rear Shocks for travel.
near new Front KYB's and Kings
Lseries Hubs, Brakes, Control Arms, with Beefy Radius Rods for the L arms.
235/75R15 Tyres on Sunraysias and a very nice BFG Muddy Spare.
Radiator with Modified outlets for EJ Motor.
Cut down Wiring Harness by Subarino.
Liberty Front Seats.
2.7 Ratio WRX Rack with matching WRX pump, Bracket and Lines.

Towbar
Roobar

maybe more i forgot.

looking to see if theyres any interest in Parts, cant see it going as a wholecar.

Cam · Post by **Cam** » Tue Dec 09, 2008 10:26 pm

Why?

Interested in suspension...

AndrewT · Post by **AndrewT** » Tue Dec 09, 2008 10:39 pm

he's copped out and got a Pajero (or something).

I'll take the fuel pump, rear driveshafts, (front shafts too if they are MY, but your running L ones now I think?), tow bar and possibly the 29's depending on condition.

Matatak · Post by **Matatak** » Tue Dec 09, 2008 10:43 pm

New car...so in reality its not gonna get driven. unsure if i want to part it out or do something else with it atm though

i will want to keep it rolling aswell for aslong as possible.

assuming you mean F & R Shockies, Springs and Strut Tops for front?

Post by **Alex** » Wed Dec 10, 2008 1:14 am

if it happens, ill take ur rad rods and rear discs.

Cam · Post by **Cam** » Wed Dec 10, 2008 11:13 am

Matatak wrote:assuming you mean F & R Shockies, Springs and Strut Tops for front?

Yep.

Wont that make it two mitsubishi's u'v got then?

Subafury · Post by **Subafury** » Wed Dec 10, 2008 11:35 am

youre not my friend anymore.

might go for the 6 stud hubs and wheels.

BrennyV · Post by **BrennyV** » Wed Dec 10, 2008 12:07 pm

if all else fails i might take the 6studs to help sell leone

Matatak · Post by **Matatak** » Wed Dec 10, 2008 5:52 pm

since when did i go 6 stud ?? 4 remember people

nah Cam sold the Lancer awhile back and drove the wagon daily for awhile.

Alex. my Rad Rods are longer then MY and L's (which are both he same length) they will only suit someone wanting to put Lcontrol arms into there MY/Brumby.

Rear discs i forgot about to, they are already drilled for either 4x140 or 4x100 PCD's and i didnt want to put an extra 4 holes in them for 6 studs so unsure how youd go about that alex.

90brumby · Post by **90brumby** » Wed Dec 10, 2008 10:30 pm

possibly take the rad and fans

Matatak · Post by **Matatak** » Thu Dec 11, 2008 5:45 pm

i want to keep it rolling/ driving for now

so CAM if you want the suspension can your old stuff go back in?

SuBaRiNo · Post by **SuBaRiNo** » Thu Dec 11, 2008 8:07 pm

Could be interested in Radius rods and L control arms if they were done by a welding place or by Vidler. Not interested if done by Wacky Workshop.

Dave

Matatak · Post by **Matatak** » Thu Dec 11, 2008 8:46 pm

SuBaRiNo wrote:Could be interested in Radius rods and L control arms if they were done by a welding place or by Vidler. Not interested if done by Wacky Workshop.

Dave

i love your attitude Dave. always impresses me.

the Rad Rods are from Jeff at Crossbred Performance.

AndrewT · Post by **AndrewT** » Fri Dec 12, 2008 12:50 am

The L series control arms were most likely made by Subaru.

SuBaRiNo · Post by **SuBaRiNo** » Fri Dec 12, 2008 11:41 pm

I remove my interest. Good Luck

Dave

Subafury · Post by **Subafury** » Sat Dec 13, 2008 7:39 pm

since when is the WW dodgy?! hahahahaha

Post by **Alex** » Sat Dec 13, 2008 8:07 pm

Subafury wrote:since when is the WW dodgy?! hahahahaha

it never is. We are the best WW in the world. Id drive my kids around in a WW car(pity i dont have kids) mmmm

alex

Matatak · Post by **Matatak** » Mon Jan 26, 2009 8:13 pm

Car is being Parted out.

Motor is gone, Clutch is gone, Wheels are gone.

Anybody want some rear discs? straight bolt up.

Cam do u still want anything on the supsension side of things?
and AndrewT im guessing u still want the rear shafts and fuel pump?

AndrewT · Post by **AndrewT** » Mon Jan 26, 2009 9:35 pm

Yeah wouldn't mind them, will have to sort something out next time we cross paths.

adamb · Post by **adamb** » Tue Jan 27, 2009 5:48 pm

how much do u want for the rear discs mat?

cheers