Page 1 of 1
P/S hose needed to suit gen 2
Posted: Mon Mar 02, 2009 1:24 pm
by 90brumby
as per title i need a p/s hose its the return off the rack back to pump its for the outback ej25 but i think the ej20 in the forrestors are the same once i get this i can drive my outback again yay
tristan
Posted: Mon Mar 02, 2009 1:39 pm
by Matatak
just use some Tranny oil cooler hose, unless you need the fitting into the rack.
Posted: Mon Mar 02, 2009 2:50 pm
by 90brumby
yep it does need the fitting 4 the rack ill see wat price i can get another hose for other wise thats wat im gonna try do where the flex is crimped on atm
Posted: Mon Mar 02, 2009 3:37 pm
by AndrewT
You could always get a hose made up at Enzed, they could use your old fitting if you have it, otherwise a new fitting probably won't cost too much.
Posted: Mon Mar 02, 2009 9:50 pm
by chriSTIan
Tristan
I have both the hoses off TT half cut(gen2)
Have u still got the rs bonnet?
Chris
Posted: Wed Mar 04, 2009 9:27 pm
by 90brumby
i have since brought the 2 hoses from swan auto 100 buks but the thread in the rack is rooted so im gonna try heli coil it other wise i need that alloy bit where the hose all screw into it appers the same as the 1 in my ute which is gen1
thanks anyway