Rego WA Stating GVM Original hand Book e copy

Morcs · Post by **Morcs** » Fri Apr 08, 2011 11:48 pm

Trying to get my Brumby transferred into Western Asutralia

I need a copy of the original owners hand book stating the GVM
As a photo of the compliance plate is not good enough...

if any on could PM me ill give them an email Address.

steptoe · Post by **steptoe** » Sat Apr 09, 2011 12:56 am

My handbook only states a loading capacity of 400kg - under the tyre section. Sheesh they should subscribe to the Fed dept transport data sheets, sounds like yo dealing with lazy appointed mechanic come inspector

steptoe · Post by **steptoe** » Sat Apr 09, 2011 1:04 am

The info is only a depiction of a comp plate with GVM 1620 kg of 1985 utility on NSW documents known as SUBARU 17 specification sheet number , WA Transport must have published them at some stage. Tell 'em to request it off NSW tech enquiries 1300 137302 in NSW anyway

Post by **TOONGA** » Sat Apr 09, 2011 10:44 am

I have the original 1989 1800 MV owners manual, do you need the whole book scanned or certain pages?

as well I have the Australian suppliment

TOONGA

Morcs · Post by **Morcs** » Sat Apr 09, 2011 8:09 pm

steptoe wrote:My handbook only states a loading capacity of 400kg - under the tyre section. Sheesh they should subscribe to the Fed dept transport data sheets, sounds like yo dealing with lazy appointed mechanic come inspector

Thats what i reckon is happening but it is to do with the licensing dept in Perth

Had a talk to one of the local inspection guys this morning he said its not uncommon for them just to request a inspection just for the rigmarole caused to the customer asking for something BS that cant be supplied without going to be inspected.

Morcs · Post by **Morcs** » Sat Apr 09, 2011 8:11 pm

TOONGA wrote:I have the original 1989 1800 MV owners manual, do you need the whole book scanned or certain pages?

as well I have the Australian suppliment

TOONGA

If you could just the section on the gvm and weights etc

Post by **TOONGA** » Sat Apr 09, 2011 8:28 pm

Ive looked through the whole manual and for the life of me i can't find anything on curb weight, loaded weight etc. sorry.

this manual has the info for the brat in the general specifications chapter

http://jdmfsm.info/Auto/Japan/Subaru/-- ... 20EA81.pdf

added the specs pages from the manual

hope that helps

TOONGA

steptoe · Post by **steptoe** » Sun Apr 10, 2011 2:50 am

send me yer email addy and i'll zoot off a pdf i have on desktop but cannot get into here

chriSTIan · Post by **chriSTIan** » Sun Apr 10, 2011 10:20 am

the pits have a book with the weights of most cars in it,just being lasy as usual.
U might have to go to a weigh bridge then

steptoe · Post by **steptoe** » Sun Apr 10, 2011 10:57 am

weighbridge does the tare not gross

Post by **TOONGA** » Sun Apr 10, 2011 11:01 am

here are the pages from the pdf link

and thats about it for information Ive been able to find

TOONGA