chasing a clutch spring for "CLINT"the imprezza
Posted: Wed Aug 08, 2012 9:08 pm
Hey gang
Im chasing a clutch spring for a 1996 imprezza.
Cheers Pete
Im chasing a clutch spring for a 1996 imprezza.
Cheers Pete
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
chasing a clutch spring for "CLINT"the imprezza
Page 1 of 1
Posted: Wed Aug 08, 2012 9:11 pm
What spring? The little ones that hold the throw-out bearing to the fork. Best bet is to buy them new from Subaru, about $12 i think
Posted: Wed Aug 08, 2012 9:47 pm
Sorry i mean the clutch arm return spring that goes from the arm to the engine so the fork will return to position .
Posted: Wed Aug 08, 2012 10:42 pm
You can buy springs of various lengths at hardware stores.
Posted: Wed Aug 08, 2012 11:41 pm
I don't think they had one.... Always saw them only on turbo or hydrolic type....
Posted: Thu Aug 09, 2012 9:00 am
All Subaru manual cars will have a spring on the Clutch Fork. Most of them use the 'Hill Brake' return spring to pull the Fork/Release Bearing away from the Clutch Pressure Plate.
Posted: Thu Aug 09, 2012 9:02 am
+1 if you need a spring and you don't have a hill holder.Gannon wrote:You can buy springs of various lengths at hardware stores.
Posted: Thu Aug 09, 2012 7:16 pm
Those postie red rubber bands are handy - sorted a hoist safety lever out with a pair 20 years ago - application still doin' fine 