RSR Performance Moving

Post Reply
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

RSR Performance Moving

Post by RSR 555 » Fri Oct 26, 2012 10:29 pm

Hi ppls..

Just for those that haven't followed the 'New Workshop' post, We will be moving sho this weekend. Starting 8am tomorrrow and working until 6pm on Saturday, followed by a bbq and drinks, then starting again on Sunday (again at 8am) sorry for those wanting to go to church :) and working until the shop is cleared out.. hopefully not too late.

We have cleared out most of the office and some of the equipment from the workshop. We have hired some big pallet/crates, so hopefully this makes life easier.

If you are free and able to help, please come on down to Kelmscott and we'll go from there.

Many thanks,
Paul
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Oct 26, 2012 10:41 pm

So you will be there at 8am :)

I will be, PJ is ready and has a towball fitted, much to my shins displeasure.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sat Oct 27, 2012 9:36 am

At the workshop ...its 7.30 am, where can I get a good coffee in this town

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sat Oct 27, 2012 11:20 am

I'll be there tomorrow, I'll bring my wagon and my trailer:) I'll see if i can get some extra labor force:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
Richie-Rich
Junior Member
Posts: 69
Joined: Mon Apr 27, 2009 10:15 pm
Location: Perth

Post by Richie-Rich » Sat Oct 27, 2012 2:45 pm

I would have been there. Family commitments both days.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Oct 27, 2012 4:28 pm

TOONGA wrote:At the workshop ...its 7.30 am, where can I get a good coffee in this town
I believe there will be a KPM coffee outlet/mobile van near you soon :twisted:

I hope the move is going well, I would probably have been there but you know... That whole continent thing gets in the way :evil:

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
coupe
Junior Member
Posts: 409
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by coupe » Sat Oct 27, 2012 8:51 pm

So far so good,the move is in full swing. Pauls shop is like the "TARDIS" looks so small but its sooooooo full .......
Use The Fork Luke

Image

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sat Oct 27, 2012 11:11 pm

HUGE THANKS to everyone that came over today to help. We got heaps done and hopefully with the extra help tomorrow we should get all knocked over. You're right Pete.. it's a small shop with shite loads of junk in it :) I hope that pump comes to good use for ya.
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Sat Oct 27, 2012 11:18 pm

No prob mate, most of us owe you from all the help you've given us ;) :D
I'll be there bright and early tomorrow :cool:

Didn't have any issues with getting that trailer home, or with the lights on it either ;)

I really can't believe how much stuff there is, I doubt a Subaru factory has as much shit as you do. lol

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Sun Oct 28, 2012 8:54 am

Here at 6.45 am.... Where are all you lazy nuggets..

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sun Oct 28, 2012 7:55 pm

Not a problem at all Paul it was good to see everyone who turned out to help. :)
taza wrote:Here at 6.45 am.... Where are all you lazy nuggets..
He did say 8

pictures from yesterday


loading up
Image

Image

Image

unloading a trippy action shot?

Image

to be sorted
Image
Image
Image

not sure if anyone got photos of today but it was very much the same procedure.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
coupe
Junior Member
Posts: 409
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth

Post by coupe » Sun Oct 28, 2012 7:59 pm

How did the move go today. Did you get enough help.?
Use The Fork Luke

Image

User avatar
niterida
General Member
Posts: 1158
Joined: Sun Apr 13, 2008 5:45 pm
Location: Geraldton WA

Post by niterida » Sun Oct 28, 2012 8:10 pm

Why didn't you hire a truck ??
[SIGPIC][/SIGPIC]

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Sun Oct 28, 2012 9:09 pm

Was good, not sure if they got all the stuff moved? I left in the arvo due to other commitments..

A fair chunk has been sorted at the new shop too so thats a start :D

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Mon Oct 29, 2012 8:50 am

Richie-Rich wrote:I would have been there. Family commitments both days.
No probs Richie, we kinda got there in the end. Just a couple of things to go and all sweet
El_Freddo wrote:I believe there will be a KPM coffee outlet/mobile van near you soon :twisted:

I hope the move is going well, I would probably have been there but you know... That whole continent thing gets in the way :evil:

Cheers

Bennie
Really lame excuse but we'll let you off. :-)
coupe wrote:How did the move go today. Did you get enough help.?
We did thanks Pete. Thanks for all your help it really helped out a lot. Cheers
niterida wrote:Why didn't you hire a truck ??
Why didn't you think of this before?
taza wrote:Was good, not sure if they got all the stuff moved? I left in the arvo due to other commitments..

A fair chunk has been sorted at the new shop too so thats a start :D
No worries Taz.. yeah a huge chunk, so thanks heaps bro.
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Mon Oct 29, 2012 9:21 am

TOONGA wrote:unloading a trippy action shot?

Image
Very.. 4 forklifts would have been awesome :)
TOONGA wrote:not sure if anyone got photos of today but it was very much the same procedure.
I didn't take any pics, so very glad you did :cool:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Mon Oct 29, 2012 10:56 am

That was going to be a panorama of the whole area. then this guy on a forklift drove into the picture and that was the result. if he had kept going in a straight line there would've been 4 forklifts :)

Anyone else get photos?

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Thu Nov 08, 2012 11:45 am

I must also say a BIG THANKS to Laurance (aka uCb) for all his help well after the weekend. He came down after work during the week to help move the last big items.

Glad to say the old place is all over with and the new place is coming together slowly. I still don't have an office or 3 phase for the hoist yet but shouldn't be too far away.

Thanks everyone that came down and helped it was very much appreciated :cool:
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

Post Reply

Return to “Western Australia”