Check engine light issues

Having issues with your ride ? Ask away in here ...
Post Reply
User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Tue Aug 24, 2010 9:40 pm

El_Freddo wrote:Thanks guys - I know which relay it is and I know where I've located it - above the driver's right foot. I guys that's an advantage of doing your own conversion...

FROG - I'll send you a PM after this thread - thank you, it'll be much appreciated!

Cheers

Bennie
How you going mate - still having problems?
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image
Top
User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Tue Aug 24, 2010 10:36 pm

Its snowing! Still. Its the best snow I've seen EVER! But it is only my first season so there could've been better years that I don't know about...

As for Ruby Scoo, I dare say that she's getting a good blanket covering going on again. I'm trying to upload some pics of her in the carpark but the server is rather slow at the moment :(

I'm just waiting for Frog's generous donation to arrive in the mail to give that a go and see if there's any change. Mail up here is pretty slow and I'm not sure if it will end up at the Genny or in Bright... Fun Fun. Then I'll have to dig into my subi and hope the door is not frozen shut, then swap out the relay.

Can't wait!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:
Contact FROG

Post by FROG » Wed Aug 25, 2010 12:17 pm

They said on the news that it's the best snow in a decade

Relay was posted Monday so hopefully you'll see it tomorrow

Meantime enjoy the snow :-)
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS
Top
User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Wed Aug 25, 2010 8:40 pm

FROG wrote:They said on the news that it's the best snow in a decade

Relay was posted Monday so hopefully you'll see it tomorrow

Meantime enjoy the snow :-)
Thanks mate - Hopefully it made it up here! I've heard that the snow clearers have given up clearing the road from Bright due to the conditions of "whales" building up over the road between the trucks clearing and returning again. Whales are snow drifts for those not in the know.

Dunno when I'll actually get to Ruby Scoo to try out this relay :( I'll have to dig her out first!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Fri Aug 27, 2010 11:11 pm

Dunno if the mail made it today - the Harrietville road was closed from 7-8pm Wednesday night till about 10am this morning. I haven't been to the genny yet, hopefully their post office, being a part of the supermarket, is open on saturdays... Finger's crossed.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
Cuenall1966
Junior Member
Posts: 2
Joined: Wed Sep 11, 2013 11:14 am
Location: Ningi Qld

Did it work?

Post by Cuenall1966 » Wed Sep 11, 2013 11:26 am

I know this thread is old, but does anyone know if the ignition relay solved the problem? I have almost identical problem.
Thanks
Top
User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:
Contact TOONGA

Post by TOONGA » Wed Sep 11, 2013 9:14 pm

Cuenall1966 wrote:I know this thread is old, but does anyone know if the ignition relay solved the problem? I have almost identical problem.
Thanks
look here for an answer

showthread.php?t=19809

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces
Top
User avatar
Cuenall1966
Junior Member
Posts: 2
Joined: Wed Sep 11, 2013 11:14 am
Location: Ningi Qld

Post by Cuenall1966 » Thu Sep 12, 2013 5:32 pm

Thanks a billion. That info is spot on
Darryl


Sent from my iPhone using Tapatalk - now Free
Top
User avatar
El_Freddo
Master Member
Posts: 12627
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Fri Sep 13, 2013 10:01 pm

Cuenall1966 wrote:I know this thread is old, but does anyone know if the ignition relay solved the problem? I have almost identical problem.
Thanks
Due to the nature of the environment I was working in I didn't take the time to swap out individual items - so I did them all at once.

I think the temp sensor and the knock sensors made a huge difference to the engine's performance and operation, I'm not 100% sure I needed the relay but it's good to know it's in good condition.

Let us know how you go with the conversion above if you have good results.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
Post Reply

Return to “Trouble Shooting”