The ALL NEW AUSubaru.com.au Forums

Posted: **Sun Aug 30, 2009 6:22 pm**

Hey Guys,

Just doing 100K service on Brumby with EJ20T, changing of plugs is planned which appears near impossible. Has anyone done this and able to provide any advice on how done, assume engine needs to be partially lifted out/up?

Cheers.

Posted: **Sun Aug 30, 2009 7:43 pm**

Yes they are normally a undo lower engine mount nut and lift job
Steve

Posted: **Sun Aug 30, 2009 7:59 pm**

What he said!^^^^

Posted: **Sun Aug 30, 2009 9:42 pm**

It would be ideal and worthwhile to install long life spark plugs - I know they're expensive but worth doing as its pain in the arse job with DOHC engines.
Cheers
AP

Posted: **Tue Sep 01, 2009 4:18 am**

remove engine, replace plugs, attach engine.

use itanium 100,000km plugs and you'll probably never have to do it again.

The ALL NEW AUSubaru.com.au Forums

Subaru Brumby / WRX - Spark Plugs / How to get 2 them

Subaru Brumby / WRX - Spark Plugs / How to get 2 them

The ***ALL NEW*** AUSubaru.com.au Forums

Subaru Brumby / WRX - Spark Plugs / How to get 2 them

Subaru Brumby / WRX - Spark Plugs / How to get 2 them

The ALL NEW AUSubaru.com.au Forums