The AUSubaru.com.au Forums

Hey all
a while ago I had to have my clutch and gearbox replaced.
And yesterday i went to activate my cruise control and it was not working.
The clutch pedal is sitting a lot closer to the floor in comparison to the other pedals.

I can provide pictrures if you like, but is the problem just because there is a sensor near the clutch pedal that is not being activated due to the repositioning of the clutch?
Or is it a fuse problem? I also only noticed yesterday that my drivinglights and brake lights in the taillights arent working, but the brake light up the top of the rear window is. Are these all hooked up to the same fuze, ie driving lights, brake lights and cruise control, or just the driving and brake lights. OR is it a possible wiring problem causing all of these things to not be working

Any help would be excellent.

Thankyou

its alright fellas fixed the cruise control issue, clutch wasnt springing back up, just had to do some adjusting, therefore the sensor picking up the clutch.