02 WRX Alarm

Mr Angry · Post by **Mr Angry** » Sun Mar 21, 2010 3:54 pm

Does anyone know how to tell what sensor is tripping the alarm?

TJS · Post by **TJS** » Sun Mar 28, 2010 6:55 pm

if its a factor key pad alarm u can pull troble coades by holding *# then turn the key on and if its the glass sensor it will flash 789 if its a door it flashes 456 and bonnet is 123 u can adjust the sensetivety on the module is the door lighton the dash glowing dull becouse that used to be a prob when i used to work for subaru when they were new

Mr Angry · Post by **Mr Angry** » Mon Mar 29, 2010 5:32 pm

cheers for that i ended up going to closes subaru dealer they said it was bonnet/boot/infosonic sensor and they checked the switches and adjusted the sensetivety on it. fingers crossed it fixed it