The AUSubaru.com.au Forums

Posted: **Sat Jul 14, 2012 1:32 pm**

Hey guys I've done a 4" lift on my brumby I'm down to my last little problem I'm not sure what to do about the gear shifter the only Idea I have is to cut the floor pan and I was just wondering how other people overcome this issue thanx

Posted: **Sat Jul 14, 2012 1:40 pm**

either cut the floor pan or lengthen the linkages

if you search the board you will find threads / posts on lengthening the linkages

TOONGA

The AUSubaru.com.au Forums

Brumby lift issues

Brumby lift issues