fuel pump coupling?

fredsub · Post by **fredsub** » Fri Nov 04, 2005 11:26 am

I am unsure about this coupling...

I don't think I can just put fuel hose onto that with hose clamps

, cause there's those holes on the sides, and the hole in the middle is just 1mm 8O

This Bosch910 pumps seems to look the same size as the old pump,or maybe marginally larger....perhaps that coupling will unscrew and the old one will screw into this new pump? .......

BTW,that is the out side (to the engine), yes?

Guest · Post by **Guest** » Fri Nov 04, 2005 5:06 pm

Yeah it's the outlet. I'd just switch those fittings from the threaded one that's on there to your standard hosetail.

If you don't have a hosetail to fit it I think I've got one here somewhere.

fredsub · Post by **fredsub** » Fri Nov 04, 2005 5:17 pm

Thanks, I guess I should be able to get the fitting off the old one when its removed.....