Page 1 of 1

wiring schematics for the brumby

Posted: Fri Feb 16, 2007 5:30 pm
by benson
hi does any one have a wiring diagram for a 1990 brumby please

Posted: Fri Feb 16, 2007 5:41 pm
by Brumby Boy
what do you need maybe we can help

Posted: Fri Feb 16, 2007 5:42 pm
by benson
i need electrical wiring dirgram to fix my fan + ac and i need to find the relay

Posted: Fri Feb 16, 2007 5:48 pm
by Brumby Boy
ah ok um i think the relays for the ac are mounted on the rh strut tower, not 100%sure tho, is there a sooby dealership close to you that would photocopy the section for you? id scan it and post it but i dont have access to a scanner or the w/shop diagrams till i go to work on monday sorry

Posted: Fri Feb 16, 2007 5:52 pm
by benson
I AM TAKING IT TO A subaru place on tuesday but i dont know how much it would cost to fix thats why i am looking around lol it is like 70 a hr to have a look so i hope it is something simple yeah because my fan in dash wont work put a new fan in and switch and resistor but i cannot think of what it cound be

Posted: Fri Feb 16, 2007 6:07 pm
by Brumby Boy
ah ok have you checked all of your fuses?

Posted: Fri Feb 16, 2007 6:09 pm
by benson
yeah i have put all new ones in still nothing

Posted: Fri Feb 16, 2007 8:23 pm
by Matt
Do you have access to a fax, as i have genuine install diagram i could fax to you tomorrow. PM your fax number, could help but still explain here what the problem is?
Both relays are under the bonnet right side on the rack thing. Also there is a soldered fuse above the drivers feet in a white fuse holder (3AG) that might be worth a check.
Cheers
Matt

Posted: Fri Feb 16, 2007 9:16 pm
by benson
ok the problem is my fan isint working i have put a new fan in a new switch a new resistor and still nothing i have put fuses is and everything and i cant fix it thanks

Posted: Fri Feb 16, 2007 11:02 pm
by fredsub
sure you can fix it....
have you got a test light or make one up?, just need a 12v lamp and wires...
so check you have power at the switch and fuses,
its just a process of elimination of where the power starts/stops/