Page 1 of 1
Liberty Bullbar
Posted: Sun Nov 18, 2007 6:46 pm
by jackfoxinc
Hey guys,
Does anyone know what the chances are of fitting a 94-98 Liberty bullbar onto an 89 Liberty? If it's possible, what mods need to be done?
Cheers
Luke
Posted: Sun Nov 18, 2007 7:24 pm
by Suby Wan Kenobi
It will basically bolt up to the front of the early model BUT the bit under the headlights will need modifing and possibly the ends in the wheel arch. The shape of the front profile is different so you may also end up with a gap infront of the grill.
Posted: Sun Nov 18, 2007 7:35 pm
by jackfoxinc
oh ok. Do you think it would be worth doing? Or too much of a muck around for something that would look a little dodgy anyway?
Posted: Sun Nov 18, 2007 10:28 pm
by vincentvega
how cheap are you getting it mate?
if its cheap enough it might be worth doing, but it is never gonan look right without some serious mods
Posted: Sun Nov 18, 2007 10:55 pm
by Suby Wan Kenobi
If your buying it new then dont worry but as VV says if its cheap enough it may be well worth doing
Posted: Mon Nov 19, 2007 5:52 pm
by jackfoxinc
It's $50. Unfortunately i dont have access to much of a workshop so serious mods arent really an option.
Posted: Mon Nov 19, 2007 9:33 pm
by AlpineRaven
Nah.. too hard, I have nudge bar from Gen 1 Liberty and does not fit on Gen 2 Liberty.
Cheers
AP
Posted: Mon Nov 19, 2007 10:08 pm
by jackfoxinc
By Gen 1 do you mean the 89 - 93 model? Sorry, im a bit of a newb.
