I have an EJ22 running in my brumby and have been thinking about either rebuilding this engine or getting another engine to rebuild and install. Anyone have a rough idea on what it would cost in parts do rebiuld an EJ22?
Also could I use the EJ22 computer and wiring loom to run an EJ25 or would I have to remove all the EJ22 gear and start fresh if I can find a well priced EJ25 halfcut
Approx cost of parts for EJ22 rebuild
Rebuild costs vary. I was told up to $900 to recondition both heads if they need significant work (new valves etc). About $300-400 for aftermarket gaskets. No idea on bottom end parts.
Early EJ25s were quad cam, and I'm pretty sure the later ones were MAP sensed, so I wouldn't expect a SOHC MAF sensing computer like an EJ22's to run either. And the EJ25 has a longer stroke than the EJ22, so manifolds aren't interchangeable.
Dane.
Early EJ25s were quad cam, and I'm pretty sure the later ones were MAP sensed, so I wouldn't expect a SOHC MAF sensing computer like an EJ22's to run either. And the EJ25 has a longer stroke than the EJ22, so manifolds aren't interchangeable.
Dane.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project
-
AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
An rebuilt engine would set you back approx $2000 bucks
2nd hand engine with unknown condition can be vary starting from 160 bucks onwards complete from wreckers.
To rebuild your engine yourself can cost you roughly from $600-$900-$1300 depending where you shop around for parts.
I recall someone saying you cant use loom/ECU from EJ22 in EJ25 but I could be incorrect.
Cheers
AP
2nd hand engine with unknown condition can be vary starting from 160 bucks onwards complete from wreckers.
To rebuild your engine yourself can cost you roughly from $600-$900-$1300 depending where you shop around for parts.
I recall someone saying you cant use loom/ECU from EJ22 in EJ25 but I could be incorrect.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
-
AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
keep us updated! We would like to see a progress and possible would be great if you do a write up.RedNekTJ wrote:Cheers for the replys, will keep looking for a EJ22 and rebuild it myself with some help from mates if required. The current engine still runs fine so if it takes a while for the rebuild to get done it's no huge drama.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic