Cams

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
libertylx
Junior Member
Posts: 6
Joined: Wed Nov 21, 2012 9:20 pm
Location: merrimac qld

Cams

Post by libertylx » Wed Jan 23, 2013 5:20 pm

Hey has anyone got any info on cam grinds for the ej20h? I'm wanting to make mine more lumpy
Top
User avatar
El_Freddo
Master Member
Posts: 12626
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Wed Jan 23, 2013 9:17 pm

If you find a local engine shop get to know them and then decide if they know what they're on about and go from there.

Over in the US they use Delta cams, but this is usually on the EJ22 NA's - it's a torque grind that's so common to use that they just refer to it as a "Delta Cam"...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
stenno
Junior Member
Posts: 116
Joined: Wed Oct 03, 2007 9:22 pm
Location: Wauchope NSW

Post by stenno » Thu Jan 24, 2013 4:26 am

A ej20h has hydraulic lifters yeh? Just grab a set of v3/4 sti cams for $300 off rexnet and use them. The lifters will self adjust clearances without the need for shims etc.
I hope you have a tune able ecu tho
Top
User avatar
libertylx
Junior Member
Posts: 6
Joined: Wed Nov 21, 2012 9:20 pm
Location: merrimac qld

Post by libertylx » Fri Jan 25, 2013 9:21 am

Hydrolic lifters, u mean springs with cups on top ?
Top
Post Reply

Return to “Engine, Gearbox and Diff”