EA81 Head Interchangeability

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
Gumbungle
Junior Member
Posts: 4
Joined: Fri Dec 13, 2013 12:05 pm
Location: Outback NSW

EA81 Head Interchangeability

Post by Gumbungle » Sun Nov 30, 2014 8:41 pm

Hi all
Are EA81 heads interchangeable side to side?

They seem to be identical, but have different casting numbers (16 vs. 9).
I got the heads back from reconditioning and as I was about to assemble them, I began to wonder...

TIA

Marcus
Top
User avatar
Nubaru
Junior Member
Posts: 165
Joined: Fri Jan 10, 2014 8:02 am
Location: within the girth

Post by Nubaru » Mon Dec 01, 2014 7:02 am

yes, mix n match :) You will notice cyl #'s appear in the block casting.
member since 10january2014 #6191
Top
User avatar
Bantum
General Member
Posts: 1994
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Mix a Lot ...

Post by Bantum » Mon Dec 01, 2014 12:36 pm

Yep - Only thing to watch out for is holes for accessories like power steering, as they may have had them done only on the right bank ( driver side in Oz ). + If you're going to be re-using them, try & keep them on the same side ( i.e. : mark them L & R ) to aid in wear & tolerances ... ;)

Cheers, Bantum ...
Top
User avatar
Gumbungle
Junior Member
Posts: 4
Joined: Fri Dec 13, 2013 12:05 pm
Location: Outback NSW

EA81 heads

Post by Gumbungle » Mon Dec 01, 2014 7:39 pm

Thanks to you both for the info.

Proceeding with rebuild - today I discovered sway bar rubbers and rear engine (gearbox) mounts all shot. Very little maintenance had been done on this little Suby in 120,000kms.

cheers all,

Gumbungle
Top
Post Reply

Return to “Engine, Gearbox and Diff”