Plastic Gearbox Mounts

Matt · Post by **Matt** » Mon Oct 02, 2006 1:28 pm

Does anyone know where you can get the Plastic (read Polyurthane) Gearbox mounts for a MY/Brumby?
Cheers
Matt

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Mon Oct 02, 2006 4:00 pm

i dont know anyone that makes them but you could try extremeRX he has a selection of nolathane bits and pieces.

SuBaRiNo · Post by **SuBaRiNo** » Mon Oct 02, 2006 5:49 pm

how would we go about contacting them??

Dave

steptoe · Post by **steptoe** » Mon Oct 02, 2006 7:31 pm

http://www.nolathane.com.au ? or noltec ? nolan ?

another brand does blue urethane but doubt anyone do these mounts. i think mackay only just started doing these in rubber, or was that kelpro ?

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Mon Oct 02, 2006 10:31 pm

Look for the Black box Motorsport advertiser at the top of the page and click on it.

subanator · Post by **subanator** » Fri Oct 06, 2006 12:09 am

I would expect the nolathane gearbox mounts to transmit heaps more noise via the floorpan, if you can put up with that. They would would be tough but.

mattl200 · Post by **mattl200** » Fri Oct 06, 2006 3:12 am

i have a local company here in tassie do mine using linatex or polyurethane

so far we have only had linatex ones done and u do feel more viarbration with them

Matt · Post by **Matt** » Fri Oct 06, 2006 4:06 am

You don't have a rough price?

mattl200 · Post by **mattl200** » Sat Oct 07, 2006 4:51 pm

were doing them for $20 beer money for the boys in there own time

and i had to supply old mounts for them to mould on

havent broken any in a 2" lifted my wagon running 27s and an ea81 turbo motor

Matt · Post by **Matt** » Fri Oct 13, 2006 6:29 am

PM Sent mattl200

SuBaRiNo · Post by **SuBaRiNo** » Fri Oct 13, 2006 10:43 am

They are cool. I want some.

Dave

Matt · Post by **Matt** » Fri Oct 13, 2006 2:36 pm

Join the club, i pm other Matt and haven't heard back yet. The look cool and are probably practical to.

MY_STI · Post by **MY_STI** » Fri Oct 13, 2006 5:56 pm

mattl200 wrote: havent broken any in a 2" lifted my wagon running 27s and an ea81 turbo motor

Despite my best efforts!

Highly recommended, esp for the price, a little more vibration in the car, but well worth it. Not real noticeable if you have a bit of an exhaust and AT's
Better than driving home with busted mounts!

Could hear the stock mounts hitting their steel limits, they didn't last long.

Matt · Post by **Matt** » Fri Oct 13, 2006 8:55 pm

MY_STI You don't know the company name that do them? Phone Number?
Cheers
Matt

mattl200 · Post by **mattl200** » Mon Oct 16, 2006 10:03 pm

matt pm sent

ill see how one set goes and see if i can get more done as time progresses

Matt · Post by **Matt** » Sun Nov 12, 2006 7:07 pm

Hows the first set going? I now have a spare set i can send down to you with some money. I am keen to give them a go, if they have gone alright.
Cheers
Matt