auto experts

Get the most out of your Engine / Gearbox with these handy hints ...
User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Sat Dec 02, 2006 8:50 pm

BYB-01 wrote:He is asking if you fried wires, shorted and then let the smoke out of them. Did you find out what you wanted from under the Vortex?
no wires are allright.Yes Brett i was checking the driveshaft setup,Thanks for that.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
Chris_Rogers
General Member
Posts: 1155
Joined: Sat Dec 31, 2005 10:00 am
Location: Brisbane
Contact:

Post by Chris_Rogers » Mon Dec 04, 2006 6:22 pm

the_postie wrote:no wires are allright.Yes Brett i was checking the driveshaft setup,Thanks for that.
was it the same as what you showed me?
Audio Express

1987 HR31 Nissan skyline
1990 R32 Nissan Skyline GTS4

2006 Holden Combo - work van :)

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Mon Dec 04, 2006 7:15 pm

sure was ...
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
Chris_Rogers
General Member
Posts: 1155
Joined: Sat Dec 31, 2005 10:00 am
Location: Brisbane
Contact:

Post by Chris_Rogers » Tue Dec 05, 2006 12:26 pm

ta! (I'm off to crawl under a few early L's now :) )
Audio Express

1987 HR31 Nissan skyline
1990 R32 Nissan Skyline GTS4

2006 Holden Combo - work van :)

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Tue Dec 05, 2006 5:42 pm

Chris i got the setup in the car and its seems a lot better than the later cv style as its got room to move.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
vincentvega
Senior Member
Posts: 2446
Joined: Tue Oct 04, 2005 10:00 am
Location: Brisvegas
Contact:

Post by vincentvega » Wed Dec 06, 2006 2:44 pm

I been thinking about this postie. Your wiring is right, im almost certain of it. The only place there could be an error is on the plug on top of the gearbox, but your sure you have that correct.

The fact that the gearbox slips now with no electricals plugged in probably means the box is stuffed, we agreed on that. but the only other thing you have modified is the tranny cooler....

where did it come from? Was it new? Is it possibly blocked starving the box of pressure??

just an idea, i still think your up for a new gearbag ;)
Image
brumbyrunner wrote:And just to clarify the real 4WD thing, Subarus are an unreal 4WD.

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Wed Dec 06, 2006 3:22 pm

dane the cooler was off a trike i used to drag years ago.i've pulled a line and watched the oil come out of the cooler it sort of pulses out not in huge volumes.I am not sure if this is normal.Done a bit more research on the vss and i'll be able to get away running just one, all that happens is it limits transfer to the rear to a min and a fault code.The 123DNRP on the display won't affect the tcu operation but i'm thinking you were right about that power /economy switch so i'll wire something in.My missus is telling me to sell it ,but i 'll hang in there for a bit more.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
vincentvega
Senior Member
Posts: 2446
Joined: Tue Oct 04, 2005 10:00 am
Location: Brisvegas
Contact:

Post by vincentvega » Wed Dec 06, 2006 3:40 pm

haha dont listen to her, you will beat it eventually!!
Image
brumbyrunner wrote:And just to clarify the real 4WD thing, Subarus are an unreal 4WD.

User avatar
Suby Wan Kenobi
General Member
Posts: 1914
Joined: Tue Oct 04, 2005 10:00 am
Location: Sunny Godwin Beach Qld

Post by Suby Wan Kenobi » Wed Dec 06, 2006 3:40 pm

The trans fluid should come out of there like a severed artery but not pulse (that you should notice)
[SIGPIC][/SIGPIC]

The long road ahead

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Thu Dec 07, 2006 4:04 pm

You wouldn't believe it.I just disconnected the the oil cooler and ran the lines back on themselves and low and behold i've got R and wait 1st,pulls great, but then slipping in drive between gears.I think the cooler cost me the box, don't often here of a cooler killing the box.I can see the light at the end of the tunnel.
Note: don't be a tight arse buy a new cooler,it'll be cheaper in the long run
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
Suby Wan Kenobi
General Member
Posts: 1914
Joined: Tue Oct 04, 2005 10:00 am
Location: Sunny Godwin Beach Qld

Post by Suby Wan Kenobi » Thu Dec 07, 2006 5:44 pm

Like a flare up between gear changes?
[SIGPIC][/SIGPIC]

The long road ahead

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Thu Dec 07, 2006 7:54 pm

yes but i can't tell if it has changed into the next gear.I can pull it back to first from the slipping and it engages and pulls but thats only up to 3500 rpm after that i run out of road.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

Post Reply

Return to “Engine, Gearbox and Diff”