gen 2 outback lsd

dirty skirt · Post by **dirty skirt** » Fri Jun 20, 2008 5:34 pm

hey i was wondering what model subie i can get an lsd to fit into my outback and how much it would roughly cost me
cheers steve

chubby37 · Post by **chubby37** » Fri Jun 20, 2008 6:17 pm

$250 to $600...any lib,wrx will fit...they are the same

AlpineRaven · Post by **AlpineRaven** » Sat Jun 21, 2008 4:56 pm

chubby37 wrote:$250 to $600...any lib,wrx will fit...they are the same

Depends if he wants CLSD or VLSD?
Cheers
AP

jzk25 · Post by **jzk25** » Sun Jun 22, 2008 1:31 pm

Easiest bolt in source(matches your original shafts) would be SG forester. Manual is 4.11, auto is 4.44, same as your Outback and there is hundreds of them in wrecking yards.

There are other sources but this would be the easiest place to source one that fits straight in.

dirty skirt · Post by **dirty skirt** » Thu Jul 17, 2008 4:47 pm

my outback has a dual range 5 speed what ratio is in my vehicle and what is better a clsd or a vlsd and what models do both of them come out in
cheers steve