MUDRAT's Manual to Auto conversion thread

jzk25 · Post by **jzk25** » Tue Mar 21, 2006 8:11 pm

It depends on what year model you have. From memory you have an early single turbo vladrulli whereas (I think) Chris Rogers has a TT cut.

Chris, I wouldn't mind swapping info with you if you need some Subaru specific stuff.

Chris_Rogers · Post by **Chris_Rogers** » Tue Mar 21, 2006 8:34 pm

Al,

I'll need bits and pieces anyway form you so I'm more than happy to oblige.

(ot )
can you find me a LATE model L Series radio facia - the one with the electronic tune radio. need the lot.
(/ot)

jzk25 · Post by **jzk25** » Tue Mar 21, 2006 8:39 pm

I was thinking more specific Subaru help for your conversion in exchange for wiring info for other models. May not be able to help with parts anymore due to a change of job.

Chris_Rogers · Post by **Chris_Rogers** » Tue Mar 21, 2006 8:59 pm

same thing to me. I diagram most things as I do them anyway. you are correct. I do have a Legacy TT cut to drop into this wagon.

seagull · Post by **seagull** » Sat Apr 01, 2006 11:01 pm

I have picked up a auto that has a busted oil pump .The pump was damaged when some one was installing the converter .

I have removed the front bell housing and the rear housing .I would like to know how do I go about removing the section ( plate ) as to get to the pump drive ?

is there any furth mods I should do before I put the box back to gether as well .

cheers seagull

seagull · Post by **seagull** » Sat Apr 01, 2006 11:06 pm

The box I have is 4.444 ratio .But one thing I did look at it has a elctronic speedo pick up .My rs auto has a cable ? whats the go there ?

seagull

steve_rising_sun · Post by **steve_rising_sun** » Mon Apr 03, 2006 9:48 pm

Screw out the electronic sensor and screw in the cable
Steve

Chris_Rogers · Post by **Chris_Rogers** » Mon Apr 03, 2006 10:03 pm

then attach the speedo wire to the reed switch on the clsuter.

seagull · Post by **seagull** » Thu Apr 13, 2006 2:22 am

so does that mean it was tt box ?

The AUSubaru.com.au Forums

MUDRAT's Manual to Auto conversion thread

Guys I need some help !