Page 1 of 1
Excessive positive camber
Posted: Wed Oct 22, 2008 8:02 pm
by rapide
I recently bought a 93 L series.The car is clean & straight, but left front wheel has way too much positive camber. Strut etc look OK so what should I replace first? Any advice much appreciated.
Posted: Thu Oct 23, 2008 5:29 am
by Gannon
The whole steering suspension setup on that side. Easier to do it all in one go.
Posted: Thu Oct 23, 2008 7:03 am
by discopotato03
Make sure the height is the same left and right .
Get under it and make sure the control arms are not bent or the inner bush collapsed .
Look closely at the cross member control arm mounting point to see if it has been pushed inwards in a previous accident .
Cheers A .
Posted: Thu Oct 23, 2008 8:33 am
by rapide
thanks heaps guys will have a go at it today.