The ***ALL NEW*** AUSubaru.com.au Forums

has any one got the workshop manual for the L series they can send to me, I cant seem to find it anywhere googled it, searched this forum etc, but nothing, need to put the transfer case back together on my gearbox

I know some of the haynes manuals have the details in there about the gearbox layout, they don't go into much details due to the work needing to "be done by a qualified workshop" or some rubbish. From memory there is enough detail for you to use the images to get the gearbox back together.

Unfortunately I do not own one of these copys, my haynes has nothing about gearboxes in there that is remotely useful

There should be a pdf in the tech manual section of the forum with the details you're after

Cheers

Bennie

Brumby Boy wrote:has any one got the workshop manual for the L series they can send to me, I cant seem to find it anywhere googled it, searched this forum etc, but nothing, need to put the transfer case back together on my gearbox

I have the '89 fsm, I can scan and e-mail if you like, just let me know.
Cheers, Mark
also are you looking just for exploded views, or verbal instructions too. Your 5 spd dual range, do you have diff lock too, is it full time 4wd, etc

T'sub that's be great, I'm just chasing exploded views, its just your basic run of the mill 5sp D/R part time 4WD no c/diff lock or anything My email is brumbyworld@hotmail.com

No rush just when you get to it...

The genuine subaru service manual does have images in it.

what is your reason and what part of the book do you require to look at?
If you wanted general information you could find an manual from Liberty's gearbox but its different to L series due different linkages and transfer case.
Cheers
AP

Brumby Boy wrote:T'sub that's be great, I'm just chasing exploded views, its just your basic run of the mill 5sp D/R part time 4WD no c/diff lock or anything My email is brumbyworld@hotmail.com

No rush just when you get to it...

Cool, ill get it out to you this AM, 9:15 Monday here
Mark

ok, they are on the way, let me know if I have missed anything.
Cheers, mark

Thanks T'sub email came through, that should do nicely.

Cheers,
Ian

Brumby Boy wrote:Thanks T'sub email came through, that should do nicely.

Cheers,
Ian

sweet!, now the work begins:)

Digging up an old thread, is there any chance of getting a copy of this as well?

I'm considering converting a single range, diff-lock able, full time 4wd to dual range by using the parts out of a part time 4wd transmission.

I'll PM you my email address.

wagonist wrote:Digging up an old thread, is there any chance of getting a copy of this as well?

I'm considering converting a single range, diff-lock able, full time 4wd to dual range by using the parts out of a part time 4wd transmission.

I'll PM you my email address.

Sure, I can send the info this coming weekend. I have the d/r diff lock awd info, ill have to check my xt6 info for the single range awd diff lock trans.

u not post the link up so we all can have a look at it if needed ?some time later

phillatdarwin wrote:u not post the link up so we all can have a look at it if needed ?some time later

Ill be scanning from a fsm, not sure how to post a link up unless it can be saved on ausubaru?

isn't there a section on here for manuals, etc (not sure how this works),
but it seems full of Vortex & Liberty stuff. It needs more L series loving:D

E-mail sent
Cheers