3.9 Lsd

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
wrx_nut
Junior Member
Posts: 378
Joined: Tue Oct 04, 2005 10:00 am
Location: Anglesea, Victoria

3.9 Lsd

Post by wrx_nut » Fri Oct 14, 2005 9:33 pm

looking for a 3.9 LSD
85' Touring Wagon, EA82T, 3" Lift, 27's, RS intercooler
90' Brumby (B&S Project!) still cutting rust :P

User avatar
jzk25
Junior Member
Posts: 213
Joined: Sun Oct 09, 2005 10:00 am
Location: Bonnydoonan

Post by jzk25 » Sat Oct 15, 2005 2:59 pm

You'll have to fit the LS centre from an RS turbo into an L diff. Not difficult if you have the skills.

User avatar
wrx_nut
Junior Member
Posts: 378
Joined: Tue Oct 04, 2005 10:00 am
Location: Anglesea, Victoria

Post by wrx_nut » Sun Oct 16, 2005 8:20 pm

so what does that involve doing? i though they brought out a 3.9 LSD in the L-series?
85' Touring Wagon, EA82T, 3" Lift, 27's, RS intercooler
90' Brumby (B&S Project!) still cutting rust :P

User avatar
Outback bloke
Senior Member
Posts: 2103
Joined: Fri Sep 30, 2005 10:00 am
Location: Morayfield - Queensland
Contact:

Post by Outback bloke » Mon Oct 17, 2005 6:09 am

It was a 3.700 Lsd in the L series. Swapping the diff centre is pretty
simple. By the time you find your donor LSD I would say we will have
all our old data back by then. I did a full article on how to change
the centres over.

Guest

Post by Guest » Mon Oct 17, 2005 3:02 pm

Try this

That's the link to the tech article in the USMB Repair Manual.

User avatar
wrx_nut
Junior Member
Posts: 378
Joined: Tue Oct 04, 2005 10:00 am
Location: Anglesea, Victoria

Post by wrx_nut » Mon Oct 17, 2005 5:50 pm

haha ok ill look into it...
85' Touring Wagon, EA82T, 3" Lift, 27's, RS intercooler
90' Brumby (B&S Project!) still cutting rust :P

Post Reply

Return to “Engine, Gearbox and Diff”